|
Product Details:
|
| Product Name: | Suspended Solids Controller | Display Range: | 0.01mg/L~100g/L |
|---|---|---|---|
| Relay Control: | 2 Settable SPST Relays | Analog Current Output: | 2 Settable 0/4~20mA |
| Communication Method: | Two-wire RS485 Interface | OTA: | Without |
| Configuration Information: | Power Off Protection | Time/Data Record: | Record 14000 Historical Data |
| Maintenance Records: | Last 100 Times | Protection Level: | IP66 |
| Highlight: | 100g/L Suspended Solids Controller,Alkali Wastewater Suspended Solids Controller,Suspended Solids Controller IP66 |
||
100g/L Suspended Solids Controller For Acid and Alkali Wastewater
Floating matter analyzer, suspended matter analyzer, sludge concentration meter, SS detector measurement principle:
The suspended matter sensor is based on the combined infrared absorption and scattered light method. The infrared light emitted by the light source is scattered by the suspended particles in the sample, and then converted into an electrical signal by the photodetector, and the suspended matter concentration of the sample is obtained after analog and digital signal processing.
Specification:
| Model | DUC2-SS-H-A |
| Software Version | DRFN SS(sludge concentration) Analysis software V1.0 |
| Sensor Input | Compatible with all DRFN's SS(sludge concentration) Digital Sensors |
| Display Range | 0.01mg/L~100g/L |
| Resolution | 0.01mg/L |
| Relay Control | 2 settable SPST relays with a maximum load of 3A/250VAC |
| Analog Current Output | 2 settable 0/4~20mA current outputs with a maximum load of 1000Ω |
| Communication Method |
Two-wire RS485 interface |
| OTA | —— |
| Display Screen |
128*64 black-and-white graphic lattice LCD |
| Configuration Information | Power off protection, parameters are retained indefinitely |
| Time/Data Record |
Year/month/day/hour/min/second, record 14000 historical data |
| Maintenance Records | Last 100 times |
| Protection Level | IP66 |
| Operating Environment | 0～60℃,RH<95% ( no condensation) |
| Storage Environment | -20～70℃,RH<55% RH( no condensation, precision instruments) |
| Shell Material | Enhanced ABS |
| Dimension | 144*144*120 mm |
| Mounting Method | Wall mounting, pipe clamping, panel installation (hole size 138*138 mm) |
| Electrical Interface | The back end reserved 3 M12*1.5 Gram head, line diameter 3~6.5 mm |
| Power Supply | 100～240VAC |
| Power Consumption | About 12W |
| Weight | About 800g |
Daruifuno Catalog.pdf
Brief introduction:
● Compatible with all DRFN digital suspended solids or sludge concentration sensors;
● Separately have a list of controller and sensor settings for quick and detailed parameter setting;
● The working status of the sensor can be queried, including reading the serial number;
● Support a variety of installation methods；
● Time and historical data recording function;
● 3.2-inch large LCD screen;
● User-friendly Chinese and English language interface;
● Password can be set to prevent misoperation;
● 2 SPST multi-function and settable relays;
● Two 0/4~20mA active current loop outputs;
● RS485 interface, Modbus RTU communication protocol;
● IP66 waterproof level, sealed enclosure can isolate pollution and corrosive gas;
Aplication:
◇ Wastewater treatment plant
◇ Waterworks
◇ Surface water
◇ Semiconductor
◇ Environmental water treatment
◇ Paper industry
◇ Mining
◇ Metallurgical Electronics
FAQ
Contact Person: Yuki Fu
Tel: +8615716217387
