|
Product Details:
|
| Product Name: | Suspended Solids Sensor | Measuring Principle: | Infrared Scattered Light Method |
|---|---|---|---|
| Measuring Range: | 0.01-120g/L | Accuracy: | ＜5% Of The Measured Value |
| Resolution: | 0.01g/L | Response Time: | T90<60s |
| Calibration: | Factor Calibration, Multi-point Calibration | Communication: | RS485, Modbus-RTU |
| Work Pressure: | ≤4bar | Work Temp: | 0~50℃ (does Not Freeze) |
| Storage Temp: | -10~60℃ | Power Supply: | 12V DC |
| Dimensions: | D65mm * L270mm | Installation: | Special 90° Installation Accessories |
| Material: | PVC(Standard)SUS316L/ T I(option) / POM | Protection Grade: | IP68 |
| Brush: | Automatic Brush(Optional) | ||
| High Light: | Suspended Solids Analyzer With Brush,45g/L Suspended Solids Sensor,Waste Treatment Suspended Solids Sensor |
||
45g/L RS485 Suspended Solids Sensor with brush for Waste Treatment
The sludge concentration sensor MLSS32 adopts the optical method, and the material used is corrosion-resistant and pollution-resistant, so that it can work stably for a long time in harsh environments. Sensors require regular calibration and maintenance to maintain accurate measurements. The sensor should have a certain anti-interference ability to prevent the measurement results from being affected by external factors (such as temperature and pressure changes). The sensor supports digital output and communication interface for integration with other devices and remote transmission and management of data.
Sludge concentration sensors play an important role in environmental protection, resource utilization and industrial production.
Wastewater treatment: In wastewater treatment plants, sludge concentration sensors can be used to monitor the sludge content during treatment to ensure treatment effectiveness and compliance with discharge standards.
Environmental monitoring: Sensors can be used to monitor the sludge concentration in natural water bodies, providing data support for water quality assessment and environmental protection.
Industrial process control: In some industrial processes, it is necessary to control the sludge concentration in the water body to ensure the smooth progress of the production process.
Resource recovery: Sludge may contain recyclable materials, and sensors can help determine when and how to collect these resources.
Specification:
| Model |
MLSS300 (no wiper) MLSS301 (with wiper) |
MLSS310 (no wiper) MLSS311 (with wiper) |
MLSS320 (no wiper) MLSS321 (with wiper) |
| Measuring Principle | Infrared scattered light method | ||
| Measuring Range | 0.01-20g/L | 0.01-45g/L | 0.01-120g/L |
| Accuracy | Less than 5% of the measured value | ||
| Resolution | 0.01g/L | ||
| Response Time | T90<60s | ||
| Calibration | Factor calibration, multi-point calibration | ||
| Communication | RS485, Modbus-RTU | ||
| Work Pressure | ≤4bar | ||
| Work Temp | 0~50℃ (does not freeze) | ||
| Storage Temp | -10~60℃ | ||
| Flow Rate | Not dependent | ||
| Power Supply | 12V DC | ||
| Dimensions | Diameter 65mm * Length 270mm | ||
| Installation | Horizontal installation, special 90° installation accessories | ||
| Material | Body: PVC(Standard)SUS316L/ T i(option) / POM | ||
| Protection Grade | IP68 | ||
| Cable | Standard 10 meters | ||
| Weight | 800g | ||
| Power Consumption | 1.5W | ||
Please click the user manual of Suspended Solids sensor here:
Brief introduction:
Aplication:
◇Soil remediation and pollution control
◇Bioenergy and Resource Recovery
◇Industrial Waste Treatment
◇Architecture and Construction
◇Academic Research
◇Wastewater treatment plant
◇ Waterworks
◇ Surface water
◇Semiconductor
◇Environmental water treatment
◇ Paper industry
◇ Mining
◇ Metallurgical Electronics
Contact Person: Yuki Fu
Tel: +8615716217387
