|
Product Details:
|
| Product Name: | Suspended Solid Analyzer | Product Model: | DUC2-SS-S |
|---|---|---|---|
| Software Version: | DRFN SS Analysis Software V1.0 | Turbidity Display Range: | 0.01mg/L~100g/L |
| Turbidity Resolution: | 0.01mg/L | Protection Grade: | IP66 |
| Size: | 144*144*120mm | Power Supply: | 100~240V AC Or 18~36V DC |
| Power Consumption: | 12W | Weight: | 800g |
| Highlight: | OTA total suspended solids sensor,12W tss sensor,IP66 total suspended solids sensor |
||
OTA Online Digital Suspended Solids Analyzer Infrared Sensor For Measurement Of TU
Brief Introduction
The DUC2-SS-S suspended solids analyzer uses an optical method for determining the turbidity suspended solids, a light beam is directed into the sample where it is scattered by suspended particles in the water. The amount of scattering depends on the amount of material in the water, the wavelength of light used and the size and composition of the suspended particles.
The matched SS sensor is OPSS800, OPSS800 digital infrared suspended solids sensor is based on the 90-degree infrared scattering method of ISO7027 standard, which measures the value of suspended solids of the sample according to the intensity of the scattered light of suspended particles in the water sample.
Advantages Of The Suspended Solids Analyzer
suspended solids controller
This DUC series of suspended solids (sludge concentration) analyzer can stably collect the data uploaded by the sensor in a special encrypted communication method, and display the data in real-time on the display screen, which is convenient for users to read.
128*64 large-screen LCD display, Chinese and English language display, rich content, to meet the different needs of users.
The enclosure protection grade of the SS meter is IP66. This material can effectively isolate the pollution and corrosive gas from the external environment.
suspended solids sensor
The unique protective structure design of the Infrared Suspended Solids Sensor detection surface can protect the sensor detection window to the greatest extent and avoid accidental collisions during installation and use to damage the sensor measurement surface
Protected measurement window design to prevent accidental damage to the sensor.
Support up to 10 points of calibration, can accurately measure the turbidity value.
The sensor stores the calibration parameters internally, supports offline calibration and plug-and-play.
The main material of the SS sensor is stainless steel and POM, which is strong and sturdy.
Applications Of The Suspended Solids Analyzer
Industrial wastewater treatment, municipal sewage treatment, river and lake monitoring, and other fields.
Technical Parameters
| Product Name |
Suspended Solids analyzer |
| Product Model |
DUC2-SS-S |
| Software Version |
DRFN SS (sludge concentration) Analysis software V1.0 |
|
Turbidity Display Range |
0.01mg/L~100g/L |
|
Turbidity Resolution |
0.01mg/L |
|
Relay Control |
2 settable SPST relays max. load 3A/250VAC |
|
Analog Current Output |
2 settable 0/4~20mA active current loop output max. load 1000Ω |
|
Communication Method |
Two-wire RS485 interface; MODBUS RTU; support JSON text data format |
|
Display Screen |
128*64 LCD, adjustable backlight mode |
|
Time History/Data Record |
Year/month/day/hour/min/second, record 14000 historical data |
|
Protection Level |
IP66 |
|
Operating Environment |
0～60℃, relative humidity less than 95% (no condensation) |
|
Storage Environment |
-20～70℃, relative humidity less than 55% (no condensation) |
|
Shell Material |
Enhanced ABS |
|
Size |
144*144*120mm (hole size 138*138 mm) |
|
Mounting Method |
Wall mounting, pipe clamping, panel mounting |
|
Power Supply |
100-240V AC or 18-36V DC |
|
Weight |
800g |
|
Power Consumption |
12W |
| Product Name | Infrared suspended solids sensor | |||
| Product Modle | OPSS800 | |||
| Measure Range | 0~3000mg/L | |||
| Resolution | 1mg/L | |||
| Accuracy | Less than 5% of the measured value | |||
| Measuring Principle | Infrared scattering principle independent of color | |||
| Calibration Method | Activated sludge calibration, diatomite calibration, linear calibration | |||
| Operating Temperature | 0.0~45.0℃ | |||
| Working Pressure | ≤0.4Mpa | |||
| Dimensions | Diameter: 52mm, length: 195mm | |||
| Material | stainless steel+POM | |||
| Weight | Approximately 700g (without cable) | |||
| Power Supply | 12VDC, power consumption about 50mA | |||
| Light Source | 850nm infrared light source | |||
Contact Person: Ms. Yuki Fu
Tel: +8615716217387
