|
Product Details:
|
| Product Name: | Chlorine Dioxide Controller | Product Model: | ADS2-U3D-CD10 |
|---|---|---|---|
| Software Version: | DRFN Chlorine Dioxide Analysis Software V1.0 | Display Range: | 0.00-200.00mg/L |
| Protection Grade: | IP66 | Size: | 144*144*120mm |
| Power Supply: | 18~36V DC | Weight: | 800g |
| Power Consumption: | 12W | Mounting Method: | Wall Mount, Pipe Clamping, Panel |
| Highlight: | RS485 Modbus Chlorine Dioxide Analyzer,20mg Chlorine Dioxide sensor,industrial cooling water Chlorine Dioxide Analyzer |
||
Fast Response Chlorine Dioxide Controller With Temperature Compensation IP66
Introduction
The ADS2-U3D-CD10 chlorine dioxide controller water quality transmitter is designed to connect to the DRFN's chlorine dioxide sensors. The chlorine dioxide analyzer can realize the measurement of disinfectant chlorine dioxide. The temperature range of the sensor is 0~50℃, the response time of the chlorine dioxide sensor is T90 60 seconds.
Advantages Of Chlorine Dioxide Controller
1. The protection grade of the shell is IP66.
2. Power-off protection function keeps information indefinitely, even if the power is off, the data will not be lost.
3. 128*64 black and white graphic dot-matrix screen.
4. Time and historical data recording functions to meet higher data management requirements.
5. A two-wire RS485 interface, the communication protocol is MODBUS RTU.
6. Two settable 0/4~20mA active current loop outputs.
7. The controller has two settable SPST relays.
Applications Of Chlorine Dioxide Controller
Online analysis of chlorine dioxide in municipal tap water, drinking water, food, beverages, and other water sources and water supply pipe networks;
Online analysis of circulating cooling water and swimming pool water, as well as sewage and wastewater disinfection and chemical addition control.
Parameters Of Chlorine Dioxide Controller
| Product Name | Chlorine Dioxide Controller |
| Product Model |
ADS2-U3D-CD10 |
| Software Version |
DRFN chlorine dioxide Analysis software V1.0 |
| Display Range |
0.00-200.00mg/L |
|
Resolution |
0.001 mg/L |
|
Accuracy |
Better than 0.15% of the measuring range |
|
Stability |
0.05% of the measuring range every 24 hours, no accumulation |
|
Repeatability |
Better than 0.1% of the measuring range |
|
Relay Control |
2 settable SPST relays, the max. load 3A/250VAC |
|
Sensor Self-diagnosis |
screen image and buzzer prompt |
|
Analog Current Output |
2 settable 0/4~20mA active current loop output max. load 1000Ω |
|
Communication Method |
RS485, MODBUS RTU; support JSON text data format |
|
Display Screen |
128*64 LCD |
|
Time History/Data Record |
Year/month/day/hour/min/second, record 14000 historical data |
|
Protection Grade |
IP66 |
|
Operating Environment |
0～60℃, relative humidity less than 95% |
|
Storage Environment |
-20～70℃, relative humidity less than 55% |
|
Shell Material |
Enhanced ABS |
|
Dimensions |
144*144*120mm (hole size 138*138 mm) |
|
Mounting Method |
Wall mounting, pipe clamping, panel installation |
|
Power Supply |
18~36V DC |
|
Weight |
800g |
| Power Consumption | 12W |
The Matching Chlorine Dioxide Sensors Recommendation
Temperature range: 0~50℃
Integrated automatic temperature compensation
Response time: T90 about 60 s
Flow rate: about 30 l/h, low flow-dependence
Shaft length: standard 175 mm, and up to 220 mm in length (mA-Version)
Connection: for mA-version 2-pole terminal, M12 male
Material: PVC-U, semipermeable membrane
| Type: | Measuring range: ppm |
Resolution: ppm |
Output signal | Power supply | Item number |
| CD10H-M0c | 0.005~2.000 | 0.001 | Modbus RTU |
9~30 VDC 20~56 mA |
3426220 |
| CD10N-M0c | 0.05~20.00 | 0.01 | 3426221 |
Contact Person: Ms. Yuki Fu
Tel: +8615716217387
