Product Details:
|
Product Name: | Chlorine Dioxide Controller | Product Model: | ADS2-U3A-CD4.2-AS2/AS3 |
---|---|---|---|
Software Version: | DRFN Chlorine Dioxide Analysis Software V1.0 | Display Range: | 0.00-200.00mg/L |
Protection Grade: | IP66 | Size: | 144*144*120mm |
Power Supply: | 100~240V AC | Weight: | 800g |
Power Consumption: | 12W | Mounting Method: | Wall Mount, Pipe Clamping, Panel |
Highlight: | Drinking water Chlorine Dioxide Meter,Swimming pool Chlorine Dioxide Transmitter,disinfectant measurement Chlorine Dioxide Controller |
Online Chlorine Dioxide Controller Modbus RTU For Drinking Water Treatment
Introduction
Chlorine dioxide sterilization is an internationally recognized high-efficiency disinfectant. Its advantages are high-efficiency and strong sterilization, broad-spectrum and long-lasting, non-toxic substances are generated after use and no pollution to environmental waters.
The ADS2-U3D-CD4.2-AS2/AS3 chlorine dioxide controller is a single-parameter instrument. It is compatible with DRFN's chlorine dioxide sensors. The chlorine dioxide analyzer with AS2 sensor can be used under the temperature of 0-50℃, with AS3 sensor can be used under the temperature of 0-70℃. They both can work under the pressure range of 0 ~ 8 bar.
Advantages Of Chlorine Dioxide Controller
1. Menu password can be set to facilitate hierarchical management;
2. A two-wire RS485 interface, the communication protocol is MODBUS RTU. The chlorine dioxide controller supports JSON text data format.
3. All the configuration entered by the user is kept indefinitely, even if there is no power, the data will not be lost.
4. 128*64 black and white graphic dot matrix screen, and the display backlight provides always on and energy-saving mode selection.
5. It has time and historical data recording functions to meet higher data management requirements.
6. Abundant output meets monitoring, control, and remote data transmission at the same time.
7. Two settable 0/4~20mA active current loop outputs, and each current output allows the user to specify what measurement value it represents. At the same time, each output can define the range of output value corresponding to the maximum and minimum current value by itself, whether it is forward or reverse correspondence, it is all right. For long-distance output, current calibration can be used to ensure the accuracy of the output. The data accuracy of the current is 0.00025 (16 bits), and the maximum load is 1000Ω.
Applications Of Chlorine Dioxide Controller
The instrument is used for disinfectant measurement in drinking water, swimming pool and industrial cooling water, water plant effluent and municipal pipe network monitoring.
Parameters Of Chlorine Dioxide Controller
Product Name | Chlorine dioxide controller |
Product Model |
ADS2-U3A-CD4.2-AS2/AS3 |
Software Version |
DRFN chlorine dioxide Analysis software V1.0 |
Display Range |
0.00-200.00mg/L |
Resolution |
0.001 mg/L |
Accuracy |
Better than 0.15% of the measuring range |
Stability |
0.05% of the measuring range every 24 hours, no accumulation |
Repeatability |
Better than 0.1% of the measuring range |
Relay Control |
2 settable SPST relays, the max. load 3A/250VAC |
Sensor Self-diagnosis |
screen image and buzzer prompt |
Analog Current Output |
2 settable 0/4~20mA active current loop output max. load 1000Ω |
Communication Method |
MODBUS RTU; support JSON text data format |
Display Screen |
128*64 LCD |
Time History/Data Record |
Year/month/day/hour/min/second, record 14000 historical data |
Protection Grade |
IP66 |
Operating Environment |
0~60℃, relative humidity less than 95% |
Storage Environment |
-20~70℃, relative humidity less than 55% |
Shell Material |
Enhanced ABS |
Dimensions |
144*144*120mm (hole size 138*138 mm) |
Mounting Method |
Wall mounting, pipe clamping, panel installation |
Power Supply |
100~240V AC |
Weight |
800g |
Power Consumption | 12W |
The Matching Chlorine Dioxide Sensor Recommendation
Type: (50℃) |
Measuring range: ppm |
Resolution: ppm |
Output signal | Power supply | Item number |
AS2MA1-CD | 0.03~1.00 | 0.01 |
4~20 mA
|
12~30 V DC RL:50~900Ω
|
3326151 |
AS2MA2-CD | 0.03~2.00 | 0.01 | 3326152 | ||
AS2MA5-CD | 0.03~5.00 | 0.01 | 3326153 | ||
AS2MA1-CD-M12 | 0.03~1.00 | 0.01 | 3426840 | ||
AS2MA2-CD-M12 | 0.03~2.00 | 0.01 | 3426841 | ||
AS2MA5-CD-M12 | 0.03~5.00 | 0.01 | 3426842 |
Type: (70℃) |
Measuring range: ppm |
Resolution: ppm |
Output signal | Power supply | Item number |
AS3MA1-CD | 0.03~1.00 | 0.01 |
4~20 mA |
12~30 VDC RL :50~900Ω |
3326161 |
AS3MA2-CD | 0.03~2.00 | 0.01 | 3326162 | ||
AS3MA5-CD | 0.03~5.00 | 0.01 | 3326163 | ||
AS3MA1-CD-M12 | 0.03~1.00 | 0.01 | 3426890 | ||
AS3MA2-CD-M12 | 0.03~2.00 | 0.01 | 3426891 | ||
AS3MA5-CD-M12 | 0.03~5.00 | 0.01 | 3426892 |
Contact Person: Ms. Yuki Fu
Tel: +8615716217387