|
Product Details:
|
| Product Name: | Conductivity Meter | Software Version: | DRFN EC Analysis Software V1.0 |
|---|---|---|---|
| EC Display Range: | 0.00~10.00 MS/cm (Full Range Automatic Switching) | Resistivity Display Range: | 0.01Ω.cm~18MΩ.cm |
| TDS Display Range: | 0.000mg/L~500g/L | Salinity Display Range: | （0.00~10.0）% |
| Display Range(Temp): | -10～150℃ /14~302℉ | EC Resolution: | 0.01µS /cm |
| Resistivity Resolution: | 0.01Ω.cm | TDS Resolution: | 0.001mg/L |
| Salinity Resolution: | 0.1℃/ 0.1℉ | Accuracy: | 0.1% Of The Measuring Range |
| Stability: | 0.05% Of The Measuring Range Every 24 Hours, No Accumulation | Repeatability: | 0.1% Better Than The Measuring Range |
| Temperature Compensation: | Automatic Or Manual(NTC10K Or PT1000) | Relay Output: | Two SPST Relays, Maximum Load 3A/250VAC |
| Communication: | RS485 Modbus RTU | Signal Output: | Two 0/4~20mA Current Outputs Maximum Load 1000Ω |
| Sensor Diagnosis: | Image Display | Time History/data Record: | —— |
| Maintenance Records: | —— | Configuration: | Power Failure Protection, Indefinite Retention Of Parameters |
| Language: | Chinese And English | Display: | 128*64 3.2-inch Large Graphic Dot Matrix LCD |
| Protection Grade: | IP66 | Enclosure Material: | Enhanced ABS |
| Power Supply: | AC: 100~240V | Dimension: | 100*100*120mm |
| Hole Size: | 92*92mm | Operating Temperature: | 0～60℃, RH<95%, Non-condensing |
| Storage Temperature: | -20～70℃, RH<55%, Non-condensing | Installation Method: | Panel |
| Weight: | 500g | Power Consumption: | 3W |
| High Light: | 10.00 MS/Cm Conductivity Controller,RS485 Modbus RTU Conductivity Meter,Image Display Conductivity Controller |
||
Analog 0.00~10.00 MS/Cm Conductivity Controller For Pure Water
Daruifuno's conductivity controller is matched with an analog conductivity sensor to calculate the conductivity of the solution by detecting the intensity of the current in the solution. At the same time, the instrument provides high-precision temperature measurement and compensation functions.
In addition, the controller can also provide parameters such as resistivity, TDS, salinity and other related conductivity.
Brief introduction:
● 3.2-inch large LCD screen;
● User-friendly Chinese and English language interface;
● Password can be set to prevent misoperation;
● 2 SPST multi-function and settable relays;
● Two 0/4~20mA active current loop outputs;
● RS485 interface, Modbus RTU communication protocol;
● Temperature detection and compensation function;
● Shortcut button of AEC1 helps you perform daily maintenance quickly;
● IP66 waterproof level, sealed enclosure can isolate pollution and corrosive gas;
● Two dimensions, can meet a variety of installation methods, and provide the necessary installation accessories at the same time.
Specification:
| Model | AEC1-C2A |
| Software version | DRFN EC Analysis software V1.0 |
| EC Display Range | 0.00~10.00 mS/cm (Full range automatic switching) |
| Resistivity Display Range | 0.01Ω.cm~18MΩ.cm |
| TDS Display Range | 0.000mg/L~500g/L |
|
Salinity Display Range |
(0.00~10.0)% |
| Display Range(Temp) | -10～150℃ /14~302℉ |
| EC Resolution | 0.01µS /cm |
|
Resistivity Resolution |
0.01Ω.cm |
| TDS Resolution | 0.001mg/L |
| Salinity Resolution | 0.1℃/ 0.1℉ |
|
Accuracy |
0.1% of the measuring range |
| Stability | 0.05% of the measuring range every 24 hours, no accumulation |
| Repeatability | 0.1% better than the measuring range |
| Temperature Compensation | Automatic or manual(NTC10K or PT1000) |
| Relay Output | Two SPST relays, maximum load 3A/250VAC |
|
Communication |
RS485 Modbus RTU |
| Signal Output | Two 0/4~20mA current outputs maximum load 1000Ω |
|
Protection Grade |
IP66 |
Aplication:
◇ Pure water ultra pure water
◇ drinking water
◇ Waste water
◇ Food and beverage industry
◇ chemical process
◇ Industrial water supply
FAQ
1. Which sensors can be connected to your EC controller?
A: The EC meter can be compatible with DRFN EC sensors.
2. The EC controller can provide resistivity, TDS, salinity and other related conductivity?
The controller can also provide parameters such as resistivity, TDS, salinity and other related conductivity.
Contact Person: Yuki Fu
Tel: +8615716217387
