|
Product Details:
|
| Product Name: | Conductivity Controller | Conductivity Display Range: | 0.000µS /cm ~500mS/cm |
|---|---|---|---|
| Resistivity Display Range: | 0.01Ω.cm~18MΩ.cm | TDS Display Range: | 0.000mg/L~500g/L |
| Salinity Display Range: | (0.00~10.0)% | Temp Display Range: | -10～500℃ /14~932℉ |
| Relay Control: | 2 Settable SPST Relays | Analog Output: | 2 Settable 0/4~20mA |
| Communication: | Two-wire RS485 Interface; | ||
| Highlight: | WIFI Default Water TDS Meter,Enhanced ABS Conductivity Meter,RS485 Interface Water TDS Meter |
||
RS485 Interface OTA Conductivity /TDS Transmitter For Pure Water
DRFN industrial Online Conductivity/TDS meter which is an intelligent Online chemical analyzer.
It is widely application for the industry of thermal power, chemical fertilizer, environmental protection, metallurgy, pharmacy, biochemistry, food and water, etc.
Conductivity/TDS meter can continuous monitoring and detecting the conductivity, resistivity, salinity, TDS and temperature in the water.
It can used together with all of DRFN digital conductivity sensors.
Specification:
| Model | DUC2-EC-S-A | |
| Software Version | DRFN EC Analysis software V1.0 | |
| Sensor Input | Compatible with all DRFN's EC Digital Sensors | |
| Display Range | Conductivity | 0.000µS /cm ~500mS/cm |
| Resistivity | 0.01Ω.cm~18MΩ.cm | |
| TDS | 0.000mg/L~500g/L | |
| Salinity | (0.00~10.0)% | |
| Temp | -10～500℃ /14~932℉ | |
| Resolution | Conductivity | 0.001µS /cm |
| Resistivity | 0.01Ω.cm | |
| TDS | 0.001mg/L | |
| Salinity | 0.01% | |
| Temp | 0.1℃/ 0.1℉ | |
| Relay Control | 2 settable SPST relays with a maximum load of 3A/250VAC | |
| Analog Current Output | 2 settable 0/4~20mA current outputs, max. load 1000Ω | |
| Communication Method |
Two-wire RS485 interface MODBUS RTU support JSON text data format |
|
| Display Screen | 128*64 LCD, adjustable backlight mode, adjustable display rate | |
| Configuration Information | Power off protection, parameters are retained indefinitely | |
| Time /Data Record |
Year/month/day/hour/min/second, record 14000 historical data record interval can be set between 1~999 minutes |
|
| Maintenance Records | Last 100 times | |
| Operating Environment | 0～60℃,RH<95% ( no condensation) | |
| Storage Environment | -20～70℃,RH<55% ( no condensation, precision instruments) | |
| Shell Material | Enhanced ABS | |
| Protection Grade | IP66 | |
| Dimension | 144*144*120 mm | |
| Mounting Method | Wall mounting, pipe clamping, panel installation (hole size 138*138 mm) | |
| Electrical Interface | The back end reserved 3 M12*1.5 Gram head, line diameter 3~6.5 mm | |
| Power Supply |
100～240VAC |
|
| Power Consumption | About 7W | |
| Weight | About 800g | |
Please click the catalog of RS485 EC controller here:
Brief introduction:
● Compatible with all DRFN conductivity sensors;
● Separately have a list of controller and sensor settings for quick and detailed parameter setting;
● The working status of the sensor can be queried, including reading the serial number;
● Support a variety of installation methods；
● Time and historical data recording function;
● 3.2-inch large LCD screen;
● User-friendly Chinese and English language interface;
● Password can be set to prevent misoperation;
● 2 SPST multi-function and settable relays;
● Two 0/4~20mA active current loop outputs;
● RS485 interface, Modbus RTU communication protocol;
● IP66 waterproof level, sealed enclosure can isolate pollution and corrosive gas;
Aplication:
◇ Drinking water
◇ Pure water
◇ Cooling water
◇ Sewage
◇ Industrial process water
FAQ
Q1. What are the special advantages of the pH instruments?
A: The instrument can not only compensate the temperature of the test sample by connecting the temperature sensor, but also self-check the working temperature of the instrument in real time. When the working temperature of the instrument changes, the instrument compensates the hardware change caused by the temperature drift. Make the test results more accurate, this is a patented technology.
Q2. Does the conductivity controller operation interface support customization?
Yes, our conductivity controller operation interface can be tailored to customers' needs.
Q3.Can customer's logo be added to the controller system and cover?
Of course, we support OEM services for customers. Both the boot interface and the controller shell can be added to the customer's logo, but there is a minimum order quantity requirement.
Q4.How long is the warranty period?
The company guarantees the instrument for one year (12 months) from the date of shippment, and the consumables and wearing parts in the equipment are not covered by the warranty.
Q5. Does the conductivity controller have an ambient temperature alarm function?
Our EC controller has ambient temperature alarm function.
Q6: What is your shipping method?
A: Small orders are delivered by international express, Bulk orders are recommended to ship by sea.
Contact Person: Yuki Fu
Tel: +8615716217387
