|TDS Conductivity Electrode
|Diameter 35mm, Length 260mm
|PT Or NTC
|Low Noise Cable Leads Directly
PPS Conductivity Analyzers,
Graphite 2 Electrode conductivity meter,
260mm Conductivity Analyzers
TDS Conductivity Electrode Graphite 2 Electrode With Temperature Compensation
Conductivity sensor technology is a very important engineering technology research field. It is used to measure the conductivity of liquids. The TDS conductivity electrode mainly monitors industrial production water, human domestic water, seawater characteristics, and electrolyte properties in batteries.
DRFN’s ASC200 series TDS conductivity electrode uses a graphite 2-electrode conductivity electrode with a K value of 1. It can be connected with our analog controller to achieve conductivity measurement in the range of 0~20000uS/cm.
The conductivity cell of the two-electrode conductivity sensor consists of a pair of electrodes. A constant voltage is applied to the electrodes. The change in the resistance of the liquid in the conductivity cell causes the current of the measuring electrode to change. It conforms to Ohm’s law and uses conductivity instead of resistivity, and uses conductivity instead of resistance in metals, that is, use conductivity and conductance to express the conductivity of the liquid, so as to achieve the measurement of liquid conductivity. DRFN's 2-electrode conductivity electrode ASC200 series uses this measuring principle.
Advantages Of The TDS Conductivity Electrode
Graphite 2 electrode
Temperature compensation PT or NTC
Measuring range from 0 to 20000μS/cm
Protection gade IP68
PPS shell, compact, high temperature, and corrosion resistance
Application Of The TDS Conductivity Electrode
The TDS conductivity electrode is widely used in human production and life and has become the industrial production and technology development of electric power, chemical industry, environmental protection, food, semiconductor industry, marine research, and development, etc.
|TDS conductivity electrode
|Graphite 2 electrode
|PT or NTC
|Diameter 35mm, length 260mm
|Low noise cable leads directly
|1"NPT pipe thread
If you are interested in the TDS conductivity electrode, please contact us, or you can continue to view other conductivity sensors with different functions.
Contact Person: Ms. Yuki Fu