|
Product Details:
|
Product Name: | Multi Parameter Controller | Product Model: | PD1000-D |
---|---|---|---|
PH Range: | -2~16pH | ORP Range: | ±2000mV |
Temperature: | PT1000 Or NTC10K | Dimensions: | 144*144*120mm |
Material: | Enhanced ABS | Power Supply: | 18~36V DC |
Power Consumption: | 7W | Weight: | 800g |
High Light: | 16pH Water Quality Transmitter,800g water quality analyzer,7W Water Quality Transmitter |
Water Quality Multi Parameter Controller Measuring PH ORP Chlorine For Pools
Product Introduction
For swimming pools, water parks and other occasions, the detection of residual chlorine is very necessary. The concentration of residual chlorine in the water cannot be too low or too high.
DRFN’s PD1000 is a multi-parameter controller for the analysis of water quality. It’s a dual-channel instrument, which can be connected to a PH/T and an ORP electrode at the same time, and combines the detected redox potential with different PH environments to evaluate the disinfection ability in the water body.
Product Advantages
Applications
The PD1000 multi-parameter controller is widely used in swimming pools, water parks, ultrafiltration, circulating water and other occasions that need to quickly evaluate the residual chlorine environment in the water.
Technical Parameters
Product Name | Multi-parameter controller |
Product Model | PD1000-D |
Software Version | DRFN Multi-parameter analysis softwareV1.0 |
pH Sensor | Glass pH sensor |
ORP Sensor | Redox potential sensors (platinum/gold sensors) |
TEMP | PT1000 or NTC10K(B) |
PH Measure Range | -2~16pH |
ORP Measure Range | ±2000mV |
TEMP Measure Range | -10~150℃ /14~302℉ |
pH Resolution | 0.01pH |
ORP Resolution | 1mV |
TEMP Resolution | 0.1℃/ 0.1℉ |
Accuracy | 0.1% of measurement range(or PH:±0.02pH /ORP:±2mV)take the larger one |
Stability | 0.05% of the measurement range every 24 hours, no accumulation |
Repeatability | Better than 0.1% of the measurement range |
Sensor Self-diagnosis | image displays with a short buzzer alert |
Relay Control | 2 configurable SPST relays with a maximum relay load of 3A/250VAC |
Analog Current Output | 2 settable 0/4~20mA active current loop outputs with a maximum load of 1000 Ω |
Communication Method | Two-wire RS485 interface, communication protocol: MODBUS RTU; support JSON text data format |
Display Screen | 128*64 black and white graphic dot matrix LCD display with adjustable backlight mode and adjustable display rate |
Configuration Information | Power failure protection with indefinite parameter retention |
Time History / Data | Year/month/day/hour/minute/second, 14000 historical data can be recorded, and the recording interval can be set between 1~999 minutes. |
Maintenance Record | Last 100 times |
Protection Level | IP66 |
Operating Environment | 0~60℃, less than 95% RH(no condensation) |
Storage Environment | -20~70℃, less than 55% RH(no condensation) |
Dimensions | 144*144*120mm |
Material | enhanced ABS |
Installation Method | Wall mounting, pipe clamping, panel(hole size 138*138mm) |
Electrical Interface | The back end of the instrument is reserved for 3 M12*1.5 gland, wire diameter 3~6.5mm |
Power Supply | 18~36V DC |
Power Consumption | About 7W |
Instrument Weight | About 800g |
If you are interested in our product dual-channel multi-parameter controller, please contact us.
Contact Person: Selena Ye
Tel: +8618013144571