|
Product Details:
|
| Product Name: | Digital Conductivity Sensor | Product Model: | C4E |
|---|---|---|---|
| Measure Principle: | 4 Electrodes | Resolution: | 0.01~1 |
| Accuracy: | ± 1% Of The Full Range | Response Time: | <5s |
| Temperature Compensation: | NTC | Power Supply: | 5~12V |
| Weight: | 300g | Protection Grade: | IP68 |
| High Light: | 4 Electrodes online conductivity analyzer,300g electrical conductivity meter,12V online conductivity analyzer |
||
Digital Conductivity Sensor Salinity With 4 Electrodes For Wastewater Treatment
The digital conductivity sensor C4E is designed with smart digital technology for optimized measures. The conductivity probe can be widely used in urban wastewater treatment, industrial effluent treatment, surface water monitoring, seawater, and drinking water.
Introduction Of The Digital Conductivity Sensor
The sensor works with 4 electrodes: an alternating current of constant-voltage is established between a primary pair of electrodes in graphite. The secondary electrodes in platinum allow of regulating the voltage to imposed to the primary’s electrodes to reflect the fouling. The voltage measured between the primary’s electrodes is in the function of the resistance of place and so, of the conductivity.
Advantages of The Digital Conductivity Sensor
"plug and play" system without re-calibration
Universal Modbus RS485 protocol
Robust and Watertight
Technical Characteristics
| Product Name |
Digital Conductivity Sensor |
| Product Model | C4E |
|
Measure Principle |
4 electrodes (2 graphics, 2 platinum) |
|
Measure ranges Conductivity |
0~200.0 μS/cm 0~2000 μS/cm 0.00~20.00 mS/cm 0.0~200.0 mS/cm |
|
Resolution |
0.01 to 1, according to the range |
|
Accuracy |
± 1% of the full range |
|
Measure Range Salinity |
5~60 g/Kg |
|
Measure Range TDS-KCl |
0-133 000 ppm |
|
Response Time |
< 5 s |
|
Working Temperature |
0°C ~+50°C |
| Temperature Compensation | NTC |
|
Stocking Temperature |
-10°C ~+60°C |
|
Signal Interface |
Modbus RS485 (standard) and SDI12 (option) |
| Max Refreshing Time |
Max<1s |
| Sensor Power Supply | 5~12V |
|
Dimensions |
Diameter: 27 mm; Length: 177 mm |
| Weight |
300 g (sensor + cable 3 meters) |
|
Material |
PVC, DELRIN, stainless steel |
|
Maximum Pressure |
5 bars |
|
Protection Grade |
IP68 |
|
Connection |
9 armoured connectors, polyurethane jacket, bare-wires or waterproof Fisher connector |
Dimensions Of The Digital Conductivity Sensor
Wiring Diagram Of The Digital Conductivity Sensor
Contact Person: Ms. Yuki Fu
Tel: +8615716217387
