IP66 Chlorine Analyzers

Efficient Online Free Chlorine Analyzer Based On Isocyanic Acid IP66

Brief Introduction

Chlorine is a highly effective and commonly used disinfectant. Chlorine is a highly effective and commonly used bactericide. Commonly used chlorination methods include adding chlorine, sodium hypochlorite, dichloroisocyanuric acid, or trichloroisocyanuric acid. The content of available chlorine in the water after chlorination is called residual chlorine. Residual chlorine is divided into free residual chlorine and compound residual chlorine according to its form and disinfection activity. DRFN's online free chlorine analyzer is used for the measurement of free chlorine based on isocyanic acid.

Advantages Of The Free Chlorine Analyzer

• 128*64 black and white dot matrix large screen, real-time display of measurement data.
• Menu password can be set to prevent misoperation by non-staff.
• Clock and historical data recording function to meet various data management requirements.
• Support a variety of installation methods, which can be applied to different installation environments.
• The enclosure protection grade is IP66, which can effectively isolate the pollution of the external environment.
• DPD-1 method determination, determine the residual chlorine value by isocyanuric acid concentration.
• Can be used for fresh water and sea water.

Technical Parameters

The Matching Chlorine Sensors Recommendation

• Model: CC1

• pH range: 4~12, greatly reduced pH dependence

• Pressure range: 0~0.5 bar, no pressure surges and/or fluctuations

• Temperature range: 0~45 ℃

• Integrated automatic temperature compensation

• Response time: T₉₀ about 2 min

• Flow rate: about 30 l/h, low flow dependence

• Shaft length: standard 175 mm, and up to 220 mm in length (mA-Version)

• Connection: for mA-version 2-pole terminal, M12 male

• Material: PVC-U, PEEK, stainless steel 1.4571, microporous hydrophilic membrane