Product Details:
|
Product Name: | Electrical Conductivity Tester | Product Model: | DUC2-EC-H-D |
---|---|---|---|
Conductivity Resolution: | 0.001µS /cm | Resistivity Display Resolution: | 0.01Ω.cm |
TDS Resolution: | 0.001mg/L | Salinity Resolution: | 0.01% |
Temperature Resolution: | -10~500℃ | Protection Grade: | IP66 |
Size: | 144*144*120mm | Power Supply: | 18~36V DC |
Highlight: | IP66 electrical conductivity tester,IP66 digital conductivity meter,18V DC electrical conductivity tester |
Online Digital Electrical Conductivity Tester Used In Pure / Ultrapure Water
Brief Introduction
Electrical conductivity is the ability of a material to build an electric current in the presence of an electric field. Metals are good conductors and therefore exhibit a large conductivity. In liquids, particularly aqueous solutions, the conductivity is greatly affected by the amount of dissolved charged atoms or molecules (ions).
DUC series digital universal electrical conductivity tester is a single parameter meter, each controller will be pre-installed with a set of embedded software to adapt to different electrical conductivity digital sensors. By accessing various different types of electrical conductivity digital sensors, to achieve the measurement needs of different scenarios.
DUC series conductivity digital universal controller can display conductivity, but also resistivity, TDS, and salinity parameters.
The conductivity resolution of the meter is 0.001µS /cm, the resistivity resolution is 0.01Ω.cm, the TDS resolution is 0.001mg/L.
The protective grade of the DUC digital conductivity tester is IP66, which can effectively isolate the pollution of the external environment and the invasion of the corrosive gas. Rich output configurations are available to meet the different detection needs of many applications.
Product Advantages
There are clock and historical data recording functions to meet higher data management requirements.
Rich output to meet monitoring, control, and data remote transmission at the same time.
128 * 64 large LCD screen, Chinese and English display, rich content.
The electrical conductivity tester has 2 settable SPST multi-function relays and 2 high-precision 0/4~20mA current outputs.
Support a variety of installation methods, it can be applied to more different installation environments, the protective level of the shell is IP66.
Applications
The digital electrical conductivity tester is widely used in pure/ultrapure water, CIP/SIP measurement, pharmaceutical food and beverage, pulp and paper, wastewater treatment and, other industries.
Technical Parameters
Product Name |
Electrical conductivity tester |
Product Model |
DUC2-EC-H-D |
Software Version |
DRFN EC Analysis software V1.0 |
Conductivity Display Range |
0.000µS /cm ~1000mS/cm |
Resistivity Display Range |
0.01Ω.cm~18MΩ.cm |
TDS Display Range |
0.000mg/L~500g/L |
Salinity Display Range |
(0.00~10.0)% |
Temperature Display Range |
-10~500℃ /14~932℉ |
Relay Control |
2 settable SPST relays max. load 3A/250VAC |
Analog Current Output |
2 settable 0/4~20mA active current loop output max. load 1000Ω |
Communication Method |
MODBUS RTU; support JSON text data format |
Display Screen |
128*64 LCD, adjustable backlight mode |
Time History/Data Record |
Year/month/day/hour/min/second, record 14000 historical data |
Protection Level |
IP66 |
Operating Environment |
0~60℃, relative humidity less than 95% |
Storage Environment |
-20~70℃, relative humidity less than 55% |
Shell Material |
Enhanced ABS |
Size |
144*144*120mm (hole size 138*138 mm) |
Mounting Method |
Wall mounting, pipe clamping, panel mounting |
Power Supply |
18-36V DC |
Weight |
800g |
Power Consumption |
7W |
Contact Person: Ms. Yuki Fu
Tel: +8615716217387