|
Product Details:
|
| Product Name: | PH ORP Controller | PH Range: | 0 ~ 14pH |
|---|---|---|---|
| ORP Range: | ± 2000mV | Temperature Range: | -10～150℃ /14~302℉ |
| Resolution: | 0.01pH/1mV/0.1℃ | Protection Grade: | IP66 |
| Operating Temperature: | 0~60℃ | Power Supply: | 18 ~ 36V DC |
| Shell Material: | Enhanced ABS | Power Consumption: | 3W |
| Mounting Method: | Panel Installation | Weight: | 500g |
| High Light: | pH ORP Controller IP66 Protection,2 Channel pH ORP Meter,pH ORP Controller 2 channel |
||
2 channel 0/4~20mA RS485 IP66 pH ORP Meter Controller For Water
The APX1-G2 pH/ORP controller from Dreifenol connects to a variety of conventional pH/T or ORP combination sensors. A variety of models support differential signal input and support access to solution grounded pH sensors to solve operational problems in the presence of stray voltages and ground loops in the solution. APX is designed to meet the needs of many applications.
Advantages of pH/ORP controller:
pH ORP controller Parameters:
|
Product Name |
PH ORP controller |
| Product Model | APX1-G2 |
| PH Range |
0~14pH |
| ORP Range | ± 2000mV |
| Temperature Range |
-10～150℃ /14~302℉ |
|
Resolution |
0.01pH / 1mV/ 0.1℃ |
|
Accuracy |
PH:±0.02 pH /ORP:±2 mV |
|
Solution Grounding |
It can eliminate the leakage interference of part of the solution |
|
Stability |
0.05% of the measurement range per 24 hours, no accumulation |
|
Temp Compensation |
NTC10K/PT1000 automatic selection or 25°C conversion manual selection |
|
Sensor Diagnosis |
Screen image display |
|
Analog Current Output |
2 channel 0/4~20mA,load 1000 ohms,and support long-term calibration |
|
Relay Control |
2 configurable SPST relays with a maximum load of 3A/250VAC |
|
Digital communication |
1 two-wire RS485 communication interface; MODBUS RTU |
|
Screen Display |
128*64 3.2-inch large graphic dot matrix LCD |
| Calibration method |
pH: 3-point calibration/5-point calibration, ORP: 2-point calibration quick calibration menu available |
|
Operating Environment |
0～60℃, RH＜ 95% |
|
Storage Environment |
-20～70℃, RH ＜ 55% |
| Power Supply |
AC: 100~240V 50/60Hz or DC:18~36V |
| Power Consumption | 3 W |
|
Shell Material |
Enhanced ABS |
|
Size |
100×100×120 mm(hole size 92*92mm) |
| Weight | 500g |
|
Mounting Method |
Panel installation |
pH ORP controller Applications:
Acid-base (pH) adjustment is to stabilize the pH value of the process medium within the required range to meet the needs of the process, in the electroplating process of electroplating solution pH control, metallurgical flotation process of pulp pH control, chemical process of process medium mother liquor pH control, etc.In water treatment process, the treated water pH value can greatly affect the use effect of potions, upon completion of a variety of different kinds of wastewater treatment may not allow emissions after the pH range.
If you are interested in the product pH ORP controller APX1-G2, please contact us.
Contact Person: Ms. Yuki Fu
Tel: +8615716217387
