|
Product Details:
|
| Product Name: | PH ORP Controller | PH Range: | 0 ~ 14pH |
|---|---|---|---|
| ORP Range: | ± 2000mV | Temperature Range: | -10～150℃ /14~302℉ |
| Resolution: | 0.01pH/1mV/0.1℃ | Protection Grade: | IP66 |
| Operating Temperature: | 0~60℃ | Power Supply: | 18 ~ 36V DC |
| Shell Material: | Enhanced ABS | Power Consumption: | 3W |
| Mounting Method: | Panel Installation | Weight: | 500g |
| Highlight: | RS485 Output pH ORP Controller,ABS Shell ORP Controller,IP66 Protection ORP Controller |
||
IP66 ABS RS485 Output Online pH ORP controller for Water Treatment
APX1 - C1Z is a measure of water pH and ORP value of real-time online monitoring controller, can access a variety of traditional pH or ORP compound sensor.
Advantages of pH/ORP controller:
1.Temperature unit: Automatic/manual temperature compensation for NTC10K or PT1000
2Two relays high/low alarm control dosing
3.1 channel 0/4~20mA current
4.Communication protocol RS485 MODBUS
5.Protection grades: IP66
6.Support AC power supply of 100 ~ 240 VAC or DC power supply of 18 ~ 36 VDC
pH ORP controller Parameters:
|
Product Name |
PH ORP controller |
| Product Model | APX1-C1Z |
| PH Range |
0~14pH |
| ORP Range | ± 2000mV |
| Temperature Range |
-10～150℃ /14~302℉ |
|
Resolution |
0.01pH / 1mV/ 0.1℃ |
|
Accuracy |
PH:±0.02 pH /ORP:±2 mV |
|
Stability |
0.05% of the measurement range per 24 hours, no accumulation |
|
Temp Compensation |
Automatic or manual (NTC10K/PT1000) |
|
Sensor Diagnosis |
Screen image display |
|
Analog Current Output |
1 settable 0/4~20mA active current loop output, maximum load 1000Ω |
|
Relay Control |
2 settable SPST relays, maximum load 3A / 250VAC |
|
Digital communication |
1 two-wire RS485 communication interface; MODBUS RTU |
|
Screen Display |
128*64 3.2-inch large graphic dot matrix LCD |
|
Operating Environment |
0～60℃, RH＜ 95% |
|
Storage Environment |
-20～70℃, RH ＜ 55% |
| Power Supply |
AC: 100~240V 50/60Hz or DC:18~36V |
| Power Consumption | 3 W |
|
Shell Material |
Enhanced ABS |
|
Size |
100×100×120 mm(hole size 92*92mm) |
| Weight | 500g |
|
Mounting Method |
Panel installation |
APX1-C1Z Rich Output:
pH ORP controller Applications:
Acid and base (pH) regulation is to stabilize the PH value of the process medium in the required range to meet the needs of the process, in the electroplating process of electroplating bath pH control, metallurgical flotation process of pulp PH control, chemical process of the process medium mother liquor pH control. In the water treatment process, the pH value of the treated water will greatly affect the use effect of various chemicals, and different kinds of wastewater may not be allowed to discharge in the pH range after the completion of various treatments.
If you are interested in the product PH ORP controller APX1-C1Z, please contact us.
Contact Person: Ms. Yuki Fu
Tel: +8615716217387
