|
Product Details:
|
| Product Name: | PH ORP Controller | PH Range: | 0 ~ 14pH |
|---|---|---|---|
| ORP Range: | ± 2000mV | Temperature Range: | -10～150℃ /14~302℉ |
| Resolution: | 0.01pH/1mV/0.1℃ | Protection Grade: | IP66 |
| Operating Temperature: | 0~60℃ | Power Supply: | 18 ~ 36V DC |
| Shell Material: | Enhanced ABS | Power Consumption: | 3W |
| Mounting Method: | Panel Installation | Weight: | 500g |
| High Light: | IP66 ORP controller,Enhanced ABS ORP controller,ORP controller for waste water |
||
IP66 0~14pH industrial online pH ORP controller for waste water
The online pH/ORP controller is suitable for the continuous monitoring of pH or ORP values of aqueous solutions in various industries.
Advantages of pH ORP controller:
1.Temperature unit: Automatic/manual temperaturecompensation for NTC10K or PT1000
2.Two relays high/low alarm control dosing
3.1 channel 0/4~20mA current
4.Communication protocol RS485 MODBUS
5.Protection grades: IP66
6.Support AC power supply of 100 ~ 240 VAC or DC power supply of 18 ~ 36 VDC
pH ORP controller Parameters:
|
Product Name |
PH ORP controller |
| Product Model | APX1-C1Z |
| PH Range |
0~14pH |
| ORP Range | ± 2000mV |
| Temperature Range |
-10～150℃ /14~302℉ |
|
Resolution |
0.01pH / 1mV/ 0.1℃ |
|
Accuracy |
PH:±0.02 pH /ORP:±2 mV |
|
Stability |
0.05% of the measurement range per 24 hours, no accumulation |
|
Temp Compensation |
Automatic or manual (NTC10K/PT1000) |
|
Sensor Diagnosis |
Screen image display |
|
Analog Current Output |
1 settable 0/4~20mA active current loop output, maximum load 1000Ω |
|
Relay Control |
2 settable SPST relays, maximum load 3A / 250VAC |
|
Digital communication |
1 two-wire RS485 communication interface; MODBUS RTU |
|
Screen Display |
128*64 3.2-inch large graphic dot matrix LCD |
|
Operating Environment |
0～60℃, RH＜ 95% |
|
Storage Environment |
-20～70℃, RH ＜ 55% |
| Power Supply |
AC: 100~240V 50/60Hz or DC:18~36V |
| Power Consumption | 3 W |
|
Shell Material |
Enhanced ABS |
|
Size |
100×100×120 mm(hole size 92*92mm) |
| Weight | 500g |
|
Mounting Method |
Panel installation |
PH ORP controller installation
The pH/ORP controllersupports a variety of mounting modes and comes with the necessary mounting accessories. The pH/ORP controller (APX1-C1Z) can be installed in a cabinet or on a wall. The controller can be mounted on the built-in support frame in two ways. In the first cabinet installation method, place a desktop in the cabinet, open the desktop, and secure the desktop to the rear of the cabinet using a support frame. The second kind of wall hanging installation, according to the gap distance of wall hanging metal bracket holes, punch two screws in the wall, put the table on the metal bracket and fixed with the support frame, the installation is complete.
pH ORP controller Applications:
Water treatment monitoring: drinking water, surface water source water quality, groundwater, environmental sewage discharge monitoring, urban drainage network monitoring
Industrial process monitoring: chemical industry, petroleum, paper making, food and medicine, PCB electroplating, etc
If you are interested in other issues with pH ORP controllers, please contact us.
Contact Person: Ms. Yuki Fu
Tel: +8615716217387
