|
Product Details:
|
| Product Name: | DO Sensor | Measuring Range: | 0.00~20.00 Mg/L |
|---|---|---|---|
| Saturation: | 0~200% | Working Temperature: | 0.0~50.0℃ |
| Working Pressure:: | 0~3Bar | Response Time: | T90 Less Than |
| Temperature Comp.: | Built-in Temperature Unit | Calibration Method: | Zero Position/slope/deviation |
| Materilal: | ABS | Protection Grade: | IP68 |
| Highlight: | 20.00Mg/L dissolved oxygen transmitter,Sewage dissolved oxygen transmitter,DO water dissolved oxygen sensor |
||
0.00~20.00 Mg/L Dissolved Oxygen Sensor For Sewage Water Treatment
Dissolved oxygen sensor OPD70 measurement methods include polarography and fluorescence. Polarography is cheap, but requires regular replacement of the diaphragm and electrolyte. The fluorescence method is expensive, but does not need to replace the diaphragm and electrolyte, and requires less maintenance. The measurement method used by our OPD70 dissolved oxygen sensor is the Fluorescence principle.
On-line dissolved oxygen analyzer with OPD70 dissolved oxygen sensor maintenance-free, dissolved oxygen electrode can continuously monitor dissolved oxygen in water, NTC automatic temperature compensation, panel type, wall-mounted type, pipe clamping installation method is optional, suitable for various weather and various used in complex industrial environments.
Specification:
|
Product Name
|
DO sensor
|
|
Product Model
|
OPD700-YD01A
|
|
Brand Name
|
Daruifuno
|
|
Measuring Range
|
Oxygen content: 0.00~20.00 mg/L saturation:
|
|
Signal Type
|
Digital |
|
Resolution
|
0.01mg/L 1%
|
|
Accuracy
|
0.1 mg/L 1%
|
|
Response Time
|
T90 less than 60s
|
|
Temperature compensation
|
Automatic, built-in temperature un |
|
Calibration Method
|
Zero position/slope/de
|
|
Work Pressu
|
0~3Bar
|
|
Operating Temperatu
|
0.0~50.0℃
|
|
Material
|
ABS |
|
Dimensions
|
Diameter: 35mm Total length: 260mm |
| Installation Size | 1"NPT at both ends of the installation thread; insertion depth 100 (including cleaning plug 1 |
| Protection Grad |
IP68 |
|
Weight
|
170g |
Please click the user manual of DO sensor here:
OPD79 dissolved oxygen user manual.pdf
Brief introduction:
● Fluorescence principle
● The digital sensor is conducive to long-distance signal transmission without serious signal attenuation
● No calibration required, can meet the requirements of field work, short-term or long-term operations
● Without consuming oxygen, accurate measurement can be achieved when oxygen concentration is low
● All-in-one package, can be used with the online transmitters, DTU, and portable instruments
● RS485 interface, Modbus RTU, support access to standard industrial control system
● The protection grade is IP68, can work continuously and stably under water for a long time
● Internal storage of calibration data, support offline calibration, plug and play on site
Aplication:
◇ Sewage
◇ Surface water monitoring
◇ Aquaculture water bodies
◇ Urban sewage treatment
◇ Industrial wastewater treatment
◇ Aquarium
FAQ
4. What is the wire length of the DO electrode?
A: The lead wire of this electrode is 1 m by default, other lengths need to be customized, contact our customer service, the price will vary with the change of length.
Contact Person: Yuki Fu
Tel: +8615716217387
