|
Product Details:
|
| Product Name: | Multi-Parameter Controller | Detection Object: | PH,Temp, EC, DO,TU |
|---|---|---|---|
| Communication: | RS485 Modbus | OTA: | Optional |
| Signal Output: | Two 0/4~20mA | ConfigurationInformation: | Power Failure Protection |
| Time/Data Logging: | Record 5000 Historical Data | Protection Grade: | IP66 |
| Instrument Shell: | Reinforced ABS | Installation Method: | Wall Mount,pipe Clamping,panel |
| High Light: | IP66 Multi Parameter Controller,IP66 Water Quality Controller,PH Water Quality Transmitter |
||
Water Quality Digital Multi-Parameter Controller For PH,Temp,EC,DO,TU
Features＆Advantages Customized multi-parameter analyzer
Daruifuno MCC100 analyzer has 4 digital channels:PH,dissolvedoxygen,conductivity and turbidity. It can measure up to 5parameters (temperature).
MCC200 can be customized, the parameters including but not limited to: PH, ORP, conductivity, salinity, TDS, dissolved oxygen, turbidity, MLSS, transparency, COD, TOC, residual chlorine, ammonia nitrogen, Doppler,etc.
Different measurement range
The MCC100/200 controller can be connected with different electrodes to realize the measurement. The measuring range is determined by different sensors.
Communication and control
The MCC100/200 analyzer has RS485 interface and the communication protocol is Modbus RTU. The controller has 2SPST relay sand two 0/4~20mA analog current outputs.
Various installation methods
The dimension of the controller is 144*144*120mm,support wall mount,pipe clamping,panel
Specification:
| Model | MCC100 |
| Software Version | Daruifuno multi-parameter analysis software V1.0 |
| Detection Object | PH,Temp, conductivity, dissolved oxygen, turbidity |
| Communication Method |
Two-wire RS485 interface communication protocol: MODBUS RTU |
| OTA | Optional |
| Screen |
128*64 graphic dot matrix LCD screen adjustable backlight mode adjustable display rate |
| Configuration Information | Power failure protection, indefinite retention of parameters |
| Time/Data Logging |
Accurate to the second, record 5000 historical data Recording interval can be set between 1 and 999 minutes |
| Maintain Records | Last 100 times |
| Protection Grade | IP66 |
| Operating Temperature | 0～60℃, RH<95%RH |
| Storage Temperature | -20～70℃,RH<55%RH |
| Instrument Shell | Shell material: reinforced ABS |
| Instrument Dimensions | 144*144*120mm(opening hole size 138*138mm) |
| Installation Method | Wall mount, pipe clamping, panel |
| Electrical Interface | Three M12*1.5 Gellen heads are reserved at the back, with a wire diameter of 3~6.5mm |
| Power | 100~240VAC,50/60Hz |
| Power Consumption | <25W |
Please click the user manual of multi-parameter controller here:
MCC100 Multi-parameter User Manual.pdf
Aplication:
◇ Pure water ultra pure water
◇ drinking water
◇ Waste water
◇ Food and beverage industry
◇ chemical process
◇ Industrial water supply
FAQ
1. Which sensors can be connected to your MCC100 Multi-Parameter controller?
A: The MCC100 has 4 digital channel, can Detection Object PH,Temp, conductivity, dissolved oxygen,turbidity at the same time.
2. The MCC100 controller can just connect with digital type sensor?
Yes. our MCC100 can connect with digital pH, digital conductivity, digital dissolved oxygen, digital turbidity sensor.
Contact Person: Yuki Fu
Tel: +8615716217387
