|
Product Details:
|
| Product Name: | PH Meter | PH: | 0~14pH |
|---|---|---|---|
| ORP Range: | ±1200mV | Temperature Range: | -10～150℃ / 14~302℉ |
| Resolution: | 0.01pH/1mV/0.1℃ | Temperature Compensatio: | Automatic Or Manual (NTC10K Or PT1000 |
| Relay Output: | Two SPST Relays | Analog Output: | A 0/4~20mA Current Output |
| Power Suppl: | AC: 100~240V Or DC:18~36V | Communication: | Without |
| Highlight: | Dyeing Wastewater PH ORP Analyzer,Surface Water PH Controller,Ground Water Ph Transmitter |
||
IP66 ABS pH analyzer For Industrial Dosing Control for Industrial process monitoring
The APX1-L1 PH ORP meters water quality transmitter use pH glass electrode measurement method, applied to various PH/ORP monitoring and dosing control occasions. Our company provides AC and DC power supply selections, both of which are wide-voltage power supply. Users can choose the right model according to their needs.
Specification:
| Product Name | PH ORP meter |
| Product Model | APX1-L1 |
| Software Version | DRFN PH Analysis software V1.0 |
| Measuring Range | PH: 0~14pH ORP: ±1200mV |
| TEMP measuring Range | -10～150℃ /14~302℉ |
| Resolution | PH: 0.01pH ORP: 1mV TEMP: 0.1℃/ 0.1℉ |
| Accuracy | 0.1% of the measuring range or ±0.02pH / ±2mV |
| Temperature Compensation | Automatic or manual(NTC10K or PT1000) |
| Relay Output | Two SPST relays, maximum load 3A/250VAC |
| Communication | —— |
| Signal Output | A 0/4~20mA current output maximum load 1000Ω |
| Sensor Diagnosis | Image display |
| Configuration | Power failure protection, indefinite retention of parameters |
| Language | Chinese and English |
| Display | 128*64 3.2-inch large graphic dot matrix LCD |
| Protection Grade | IP66 |
| Enclosure Material | Enhanced ABS |
| Power Supply | AC: 100~240V or DC:18~36V |
| Dimension | 100*100*120mm |
| Hole Size | 92*92mm |
| Operating Temperature | 0～60℃, RH<95%, non-condensing |
| Storage Temperature | -20～70℃, RH<55%, non-condensing |
| Installation Method | Panel |
| Weight | 500g |
| Power Consumption | About 3W |
Please click Catalog here:
Brief introduction:
● The pH meter uses pH glass electrode measurement method for various applications of pH ORP monitoring and dosing control.
● The pH ORP analyzer has 2 settable SPST multi-function relays.
● 1 high precision 0/4~20mA current output.
● 3.2inches,128*64 large LCD screen with multi-language display options and rich content.
● Menu password of the pH meter can be set for hierarchical management easily.
● Shortcut keys help you perform necessary daily maintenance without entering the menu.
● We provide two power supply AC and DC,both with wide voltage supply.
Aplication:
Water treatment monitoring
Drinking water,surface water,water quality analyze,ground water,ect.
Industrial process monitoring and dosing control
Chemical,petroleum,paper,food and medicine,PCB manufacturing,etc.
FAQ
Q1. Does the instrument have a self-diagnostic function and how does it prompt?
A: The pH meter has self-diagnosis function.When the instrument is in calibration and maintenance,it can diagnose the PH/ORP sensor,if there is improper operation or poor PH/ORP sensor characteristics, the screen makes an image display and advises the user to re-maintain or replace the sensor.
Q2. What are the special advantages of the pH instruments?
A: The instrument can not only compensate the temperature of the test sample by connecting the temperature sensor, but also self-check the working temperature of the instrument in real time. When the working temperature of the instrument changes, the instrument compensates the hardware change caused by the temperature drift. Make the test results more accurate, this is a patented technology.
Contact Person: Yuki Fu
Tel: +8615716217387
