Analog Type Glass PH Probe With 0~100℃ Temperature Resistance For Clean Water

Analog Type Glass PH Probe With 0~100℃ Temperature Resistance For Clean Water

In the glass sensor measurement method, the known pH value of the reference solution is determined by using a glass electrode and a reference electrode. Measure the potential difference between the two electrodes. The pH of the liquid in the glass electrode is usually 7. Potentiometric methods determine pH by using the electrical potential of pH-sensitive electrodes as a measurement signal.

Specification:

More details please refer to catalog here:

Daruifuno Catalog.pdf

Brief introduction:

• Glass shell pH composite electrode;

• Blue low impedance hemispherical glass head, high strength, not easy to break;

• The reference is ceramic hole shape core, it has the characteristics of smooth response, no potential drift and good stability;

• The reference system is Ag/AgCl, double salt bridgefilled with KCl colorless high temperature gel;

• The reference electrolyte is saturated KCL+ excess KCL crystal, the service life is long;

• The ASP101 pH electrode can not only be used for drinking water but also in wastewater, sewage and other industria applications.

Aplication: Pure water monitoring

Drinking water,surface water,water quality analyze,ground water,ect.

Industrial process monitoring and dosing control

Chemical,petroleum,paper,food and medicine,PCB manufacturing,etc.

FAQ

1. What is themeasurement principle of this pH electrode?
A: The pH value potentiometric method uses the potential difference of glass electrodes for pH measurement.

2. How is this glass pH electrode composed?
A: The pH electrode is usually composed of an indicator electrode and a reference electrode.

3. How to judge the pH of the solution?
A: If the internal hydrogen ion concentration of the pH glass bulb is lower than the outside, the measured solution is recorded as acidic and the pH value is lower than 7; if the two are the same, the solution is neutral and the pH value is equal to 7; if the internal hydrogen ion concentration is higher than externally, the measured solution is alkaline and the pH value is higher than 7

4. What is the wire length of the pH electrode?
A: The lead wire of this electrode is 3m by default, other lengths need to be customized, contact our customer service, the price will vary with the change of length.