|
Product Details:
|
Product Name: | Dissolved Oxygen Analyzer | Model: | DUC2-DO OPD7 |
---|---|---|---|
Range: | 0.00~20.00 Mg/L | Principle: | Fluorescence Method |
Communication: | RS485 MODBUS RTU | Alarm: | 2 Settable SPST Relays |
Output Signal: | 0/4~20mA | Display: | 3.2 Inch LCD Screen |
Protection Grade: | IP66(controller) IP68(sensor) | Operating Temperature: | 0.0~50.0℃ |
Material: | Enhanced ABS | Power: | AC 100~240V |
Highlight: | Optical Dissolved Oxygen Analyzers,Modbus RTU Dissolved Oxygen Analyzers,Modbus RTU Online Dissolved Oxygen Meter |
Optical Online Dissolved Oxygen Analyzer For Industrial Application
Dissolved oxygen refers to molecular oxygen dissolved in water. It is an indispensable condition for the survival of aquatic organisms and an important indicator of the degree of organic pollution in water bodies.
The rapid, accurate and continuous measurement of dissolved oxygen content in water bodies is of great significance to the development of industrial and agricultural production, environmental monitoring, and aquaculture.
The set of Daruifuno dissolved oxygen analyzer is reliable, flexible and low-maintenance. The dissolved oxygen meter and sensor are designed for the application of industrial online environment.
The dissolved oxygen controller is digital and has automatic compensation for air pressure display. The matched DO sensor adopts Fluorescence principle.
Specification of Dissolved Oxygen Analyzer
Model | DUC2-DO-H-A | |
Software Version | DRFN DO Analysis software V1.0 | |
Sensor Input | Compatible with all DRFN's DO Digital Sensors | |
Display Range | DO Concentration | DO concentration 0-50mg/L (or ppm), unit can be switched |
Saturation | 0-400% | |
TEMP | -10~500℃ /14~932℉ | |
Atmospheric Pressure | 30-120kpa | |
Resolution | DO Concentration | 0.01 mg/L(or ppm) |
Saturation | 1% | |
TEMP | 0.1℃/ 0.1℉ | |
Salinity Compensation Range | Input range 0.0001-99999ppt | |
Relay Control | 2 settable SPST relays with a maximum load of 3A/250VAC | |
Analog Current Output | 2 settable 0/4~20mA current outputs, max load 1000Ω | |
Communication Method |
RS485 interface |
|
Display Screen | 128*64 LCD, adjustable backlight mode, adjustable display rate | |
Configuration Information | Power off protection, parameters are retained indefinitely | |
Time/Data Record |
Record 14000 historical data |
|
Maintenance Records | Last 100 | |
Operating Temperature | 0~60℃,RH<95% ( no condensation) | |
Storage Temperature | -20~70℃, RH<55% ( no condensation, precision instruments) | |
Shell Material | Enhanced ABS | |
Protection Grade | IP66 | |
Dimension | 144*144*120 mm | |
Mounting Method | Wall mounting, pipe clamping, panel (hole size 138*138 mm) | |
Electrical Interface | The back end reserved 3 M12*1.5 Gram head, line diameter 3~6.5 mm | |
Power Supply | 100~240VAC | |
Power Consumption | About 7W | |
Weight | About 800g |
Model |
OPD70 |
Measuring Range |
Oxygen content: 0.00~20.00 mg/L |
Resolution | 0.01mg/L 1% |
Accuracy | 0.1 mg/L 1% |
Response Time | T90 less than 60s |
Temperature Compensation | Automatic, built-in temperature unit |
Calibration Method | Zero position/slope/deviation |
Work Pressure | 0~3Bar |
Operating Temperature | 0.0~50.0℃ |
Material | ABS |
Dimensions | Diameter: 35mm Total length: 260mm |
Installation Size |
1"NPT at both ends of the installation thread; |
Protection Grade | IP68 |
Weight | 170g |
Features of the dissolved oxygen controller
● 3.2-inch large LCD screen;
● User-friendly Chinese and English language interface
● Time and historical data recording function
● 2 SPST multi-function and settable relays
● Two 0/4~20mA active current loop outputs
● RS485 interface, Modbus RTU communication protocol
● IP66 waterproof level
Features of the dissolved oxygen sensor
● No calibration required
● Without consuming oxygen
● All-in-one package
● RS485 interface, Modbus RTU
● The protection grade is IP68
● Internal storage of calibration data
● Automatic temperature compensation
Application
◇ Sewage
◇ Surface water monitoring
◇ Aquaculture water bodies
◇ Urban sewage treatment
◇ Industrial wastewater treatment
◇ Aquariums
FAQ:
1. Is your company a manufacturer?
We are a manufacturer. We have our own R&D team and production workshop to ensure the quality and quantity of products.
2. How is the price of the product determined?
The price of the product is ordered according to the purchase quantity. If your purchase is large and will have a long-term cooperation, then we will give you a special price.
3. What does this dissolved oxygen analyzer include?
There is a controller and a sensor. The sensor's wire is 10 meters by default. Please communicate if necessary for installation accessories.
Contact Person: Ms. Yuki Fu
Tel: +8615716217387