|
Product Details:
|
| Product Name: | Dissolved Oxygen Analyzer | Product Model: | DUC2-DO-H |
|---|---|---|---|
| DO Concentration Display Range: | 0-50mg/L | DO Saturation Display Range: | 0-400% |
| Relay Control: | 2 Settable SPST Relays | Communication Protocol: | MODBUS RTU |
| Protection Grade: | IP66 | Size: | 144*144*120mm |
| Power Supply: | 100~240V AC Or 18~36V DC | Weight: | 800g |
| Highlight: | Waste water treatment Dissolved Oxygen Analyzer,IP66 Dissolved Oxygen controller,20mgL Dissolved Oxygen Analyzer |
||
Digital Dissolved Oxygen Analyzer Luminescence DO Probe RS485 For Water
Brief Description
The DUC series digital dissolved oxygen analyzer, is a single parameter controller, within each dissolved oxygen analyzer, a set of embedded software is pre-installed to adapt to different dissolved oxygen digital sensors.
The optical dissolved oxygen sensor OPTOD uses optical dissolved oxygen technology, which is based on luminescent optical technology.
Advantages Of The Dissolved Oxygen Analyzer
Application Of Dissolved Oxygen Analyzer
Technical Parameters Of Dissolved Oxygen Analyzer
| Product Name | Dissolved oxygen controller |
| Product Model |
DUC2-DO-H |
| Software Version |
DRFN DO Analysis software V1.0 |
| DO Concentration Display Range |
0-50mg/L |
|
DO Saturation Display Range |
0-400% |
|
TEMP Display Range |
-10～500℃ /14~932℉ |
|
Atmospheric Pressure Display Range |
30-120kpa |
|
Salinity Compensation Range |
Input range0.0001-99999ppt |
|
Relay Control |
2 settable SPST relays max. load 3A/250VAC |
|
Analog Current Output |
2 settable 0/4~20mA active current loop output max. load 1000Ω |
|
Communication Method |
MODBUS RTU; support JSON text data format |
|
Display Screen |
128*64 LCD |
|
Time History/Data Record |
Year/month/day/hour/min/second, record 14000 historical data |
|
Protection Level |
IP66 |
|
Operating Environment |
0～60℃, relative humidity less than 95% |
|
Storage Environment |
-20～70℃, relative humidity less than 55% |
|
Shell Material |
Enhanced ABS |
|
Size |
144*144*120mm(Hole size 138*138mm) |
|
Mounting Method |
Wall mounting, pipe clamping, panel installation |
|
Power Supply |
18-36V DC or 100~240V AC |
|
Weight |
800g |
| Product Name | Luminescent dissolved oxygen sensor |
| Product Model | OPTOD |
| Measuring range |
0.00~20.00 mg/L 0~200% |
| Resolution | 0.01 |
| Accuracy |
0.1 mg/L 1% |
| Response Time | 90% of the value in less than 60 seconds |
| Temperature Compensation | Built-in temperature unit, automatic temperature compensation |
| Calibration Method | Zero position/slope/deviation |
| Work Pressure | 0~5Bar |
| Operating Temperature | 0.0~50.0℃ |
| Material | PPS |
| Dimensions | Diameter: 25mm, total length: 150mm |
| Installation Size | One inch 1"NPT at the beginning and end of the installation thread; insertion depth 100 (including cleaning plug 115) |
| Protection level | IP68 |
| Weight | 450g |
Contact Person: Ms. Yuki Fu
Tel: +8615716217387
