|
Product Details:
|
| Product Name: | Dissolved Oxygen Analyzer | Product Model: | DUC2-DO-S |
|---|---|---|---|
| DO Concentration Display Range: | 0-50mg/L | DO Saturation Display Range: | 0-400% |
| Protection Grade: | IP66 | Size: | 144*144*120mm |
| Power Supply: | 100~240V AC Or 18~36V DC | Weight: | 800g |
| Power Consumption: | 7W | ||
| Highlight: | IP66 Dissolved Oxygen Analyzers,IP66 dissolved oxygen analyser,240V AC Dissolved Oxygen Analyzers |
||
Digital Dissolved Oxygen Analyzer Wifi Remote Management For Aquaculture
Brief Introduction
The dissolved oxygen analyzer is composed of a controller and a DO sensor. The dissolved oxygen controller is a single parameter controller, a set of embedded software is pre-installed to adapt to different dissolved oxygen digital sensors. By accessing different types of dissolved oxygen digital sensors, to achieve the measurement needs of different scenarios.
The DUC2-DO-S dissolved oxygen controller with the OPD70 dissolved oxygen sensor is a complete solution for long-term dissolved oxygen measurements in waste water aeration basins, aquaculture and all types of environmental water.
The OPTOD70 sensor uses fluorescence method the determine the oxygen concentration in water.
Advantages Of The Dissolved Oxygen Analyzer
The dissolved oxygen controller configures with RS485 Modbus RTU, RS485 allows multiple devices to be connected to the same bus and perform data transmission and control through serial communication protocols, making the integration between devices simpler and more flexible. RS485 uses differential signal transmission, which can resist electromagnetic interference in industrial environments and ensure stable data transmission. RS485 can support relatively long communication distances, allowing devices to be distributed in distant locations while maintaining reliable communication.
The dissolved oxygen digital universal controller has the salinity and air pressure compensation function.
The dissolved oxygen meter has 2 settable SPST multi-function relays and 2 high-precision 0/4~20mA current outputs.
The protection grade of the dissolved oxygen sensor is IP68, it can work continuously and stably under water for a long time.
No need to consume oxygen, especially at very low oxygen concentration for accurate measurement.
Applications
The dissolved oxygen analyzer can be widel used in aquaculture industry, sewage treatment plant, boiler feed water, condensate, and other industrial industries.
Technical Parameters
| Product Name | Dissolved oxygen analyzer |
| Product Model |
DUC2-DO-S |
| Software Version |
DRFN DO Analysis software V1.0 |
| DO Concentration Display Range |
0-50mg/L |
|
DO Saturation Display Range |
0-400% |
|
TEMP Display Range |
-10～500℃ /14~932℉ |
|
Atmospheric Pressure Display Range |
30-120kpa |
|
Salinity Compensation Range |
Input range0.0001-99999ppt |
|
Relay Control |
2 settable SPST relays max. load 3A/250VAC |
|
Analog Current Output |
2 settable 0/4~20mA active current loop output max. load 1000Ω |
|
Communication Method |
MODBUS RTU; support JSON text data format |
|
Display Screen |
128*64 LCD |
|
Time History/Data Record |
Year/month/day/hour/min/second, record 14000 historical data |
|
Protection Level |
IP66 |
|
Operating Environment |
0～60℃, relative humidity less than 95% |
|
Storage Environment |
-20～70℃, relative humidity less than 55% |
|
Shell Material |
Enhanced ABS |
|
Size |
144*144*120mm (hole size 138*138 mm) |
|
Mounting Method |
Wall mounting, pipe clamping, panel installation |
|
Power Supply |
18~36V DC or 100~240V AC |
|
Weight |
800g |
Contact Person: Ms. Yuki Fu
Tel: +8615716217387
