Product Details:
|
Product Name: | Optical Dissolved Oxygen Sensor | Product Model: | OPTOD |
---|---|---|---|
Measure Principle: | Optical Measure By Luminescence | Resolution: | 0.01 |
Accuracy: | ±0.1mg/L ±0.1ppm ±1% | Response Time: | 90% Of The Value In Less Than 60 Seconds |
Temperature Compensation: | NTC | Power Supply: | 5~12V |
Protection Grade: | IP68 | Dimensions: | Diameter: 25 Mm, Length: 146 Mm |
Highlight: | RS485 Optical Dissolved Oxygen Sensor,Fish Farming dissolved oxygen probe,luminescent optical Dissolved Oxygen SensorWastewater Dissolved Oxygen Elestrode |
Digital Optical Dissolved Oxygen Sensor Luminescence Measure For Fish Farming
The optical dissolved oxygen sensor OPTOD uses optical dissolved oxygen technology, which is based on luminescent optical technology. The OPTOD sensor is approved by the ASTM International Method D888-05.
Application Of The Optical Dissolved Oxygen Sensor
Aquarium
Drinking water
Advantages of The Optical Dissolved Oxygen Sensor
Meet the demands of field works and short or long term campaigns
"plug and play" system without re-calibration
Optical Technology without calibration
No drift, Reduced maintenance
Accurate measure in all situation and especially in very low oxygen concentrations
Digital communication Modbus RS485 protocol
Can be connected to all devices commonly used
Compact, strong, and light, the sensor allows portable or fixed/permanent use
Body in Stainless steel (316 L) or Titanium for applications in corrosive environment.
Technical Characteristics
Product Name |
Optical Dissolved Oxygen Sensor |
Product Model | OPTOD |
Measure Principle |
Optical measure by luminescence |
Measure Ranges |
0.00 to 20.00 mg/L 0.00 to 20.00 ppm 0-200% |
Resolution |
0.01 |
Accuracy |
±0.1mg/L ±0.1 ppm ±1% |
Response Time |
90% of the value in less than 60 seconds |
Frequency of recommended measure |
>5 s |
Water Move |
No necessary move |
Temperature Compensation | NTC |
Stocking Temperature |
-10°C ~+60°C |
Signal Interface |
Modbus RS485 (standard) and SDI12 (option) |
Sensor Power Supply | 5~12V |
Dimensions |
Diameter: 25 mm; Length: 146 mm |
Weight |
Stainless steel version 450g (sensor + cable 3 m) Titanium version 300 g (sensor + cable 3 m) |
Material |
Stainless steel 316L, New : body in Titanium |
Maximum Pressure |
5 bars |
Protection Grade |
IP68 |
Connection |
9 armoured connectors, polyurethane jacket, bare-wires or waterproof Fisher connector |
Electric Consumption |
Standby 25 μA Average RS485 (1 measure/ seconde) : 4.4 mA Average SDI12 (1 measure/ seconde) : 7.3 mA Current pulse: 100 mA |
Dimensions Of The optical dissolved oxygen Sensor
Wiring Diagram Of The Inductive Conductivity Sensor
Contact Person: Ms. Yuki Fu
Tel: +8615716217387