IP66 220V Chlorine Analyzers For Detecting Pools

IP66 220V Chlorine Controller For Detecting The Absence Of Chlorine For Pools

Introduction 

The chlorine meter is used for checking whether the drinking water contains chlorine under the condition of 6.5 ~ 9pH. In order to protect the equipment. The DUC2-CN1.1-H-A chlorine controller is a single-parameter instrument, it is connected to the chlorine sensor to realize the detection of the absence of chlorine.

Advantages Of The Chlorine Controller

1. Rich output configuration, which can transmit analog and digital signals, and can also connect and control other devices through relays to meet the different needs of many applications.

2. Record the user's maintenance details of the equipment, the calibration effect of the diagnostic sensor, and will give corresponding prompts for inaccurate calibration instruments.

3. Two-wire RS485 interface, the communication protocol is MODBUS RTU, support JSON text data format.

4. 2 configurable 0/4~20mA active current loop outputs.

5. It has clock and historical data recording functions to meet higher data management requirements.

Parameters Of The Chlorine Controller

The Matching Chlorine Sensors Recommendation

• Model: CN1.1
• pH range: 6.5~9
• Pressure range: 0~0.5 bar, no pressure surges and/or fluctuations

• Temperature range: 0~ 40℃, (not any ice crystals in water)

• Integrated automatic temperature compensation
• Response time: T₉₀ about 2 min
• Flow rate: about 30 l/h, low flow dependence
• Shaft length: standard 195 mm, and 205 mm (Modbus version)
• Connection: Modbus RTU M12 male
• Material: PVC-U, PEEK, stainless steel 1.4571, microporous membrane