|ORP Sensor Electrode
|0 ~ 4bar
|Signal Line Connector:
|Bare Wire Head
2000mV ORP Sensor,
2000mV orp electrode,
100℃ ORP Sensor
NTC10K 2000mV ORP Sensor ORP Electrode With PPS Plastic Shell
The composite ORP electrode adopts an annular platinum detection head with high-performance PPS plastic shell, resist high temperature, resist corrosion. The ORP range is ±2000mV. The pressure range of the ORP electrode is 0~4bar.
A high-precision NTC10K temperature resistor is installed inside the ORP electrode to detect the solution temperature simultaneously.
The structure of the sensor is firm. The ORP sensor has mounting threads at the beginning and end, easy to install.
The reference of the ORP sensor ASR401N-D10-A uses a large-area annular multihole Teflon diaphragm. The advantage of porous Teflon diaphragms is the fast permeation rate and quick response, and the material is not easy to clog and easy to clean.
the reference system is designed of double salt bridge. The reference electrode is Ag/AgCl, filled saturated KCL+ excess KCL crystals.
The ORP electrode is equipped with a protective sleeve with its own cleaning port, so the user can quickly access the automatic cleaning system and save time.
This ORP probe is equipped with a standard 10-meter low noise lead.
1. Water treatment monitoring: drinking water, surface water source water quality, groundwater, environmental protection sewage discharge monitoring, urban drainage pipe network monitoring, etc.
2. Industrial process monitoring and dosing control management: chemical industry, petroleum, papermaking, food and medicine, electroplating, PCB manufacturing, etc.
|ORP sensor electrode
A British 1 NPT of the head and the tail for each mounting thread
Insert depth 100(including cleaning plug 115)
Diameter 35mm/Total length 260 mm(include the cleaning cover)
The Redox electrode is a precious metal electrode. It is used for potential measurements and at the same time cannot participate in chemical reaction processes. It means the electrode should be subjected to chemical shocks. Therefore, only precious metals such as platinum, gold, or silver can be used here.
If you want to know more about the analog signals ORP sensor, please contact us.
Contact Person: Ms. Yuki Fu