|Product Name:||PH Probe Sensor||Product Model:||ASP600N-D10-A|
|Temperature Unit:||NTC10K||PH Range:||0~14pH|
|Pressure Range:||0 ~ 4bar||Working Temperature:||0~100℃|
|Material:||PPS+glass+ceramics +Ti||Size:||Diameter 35mm/Total Length 260 Mm|
NTC10K ph probe sensor,
14pH ph electrode sensor,
Sewage Water ph probe sensor
NTC10K Ti PH Electrode PH Probe Sensor Temperature Compensation For Sewage Water
Introduction and advantages:
pH composite electrodes specifically designed for accurate detection in complex, contaminated industrial engineering environments. Metal alloy titanium solution grounding electrode with high resistance to the corrosive environment.
A high precision NTC10K temperature resistor for temperature detection and compensation, full contact with the measured solution, to meet the requirements of high-speed temperature response, temperature compensation is also more timely.
The pH sensor ASP600N-D10-A is encapsulated with enhanced PPS plastic shell, high temperature resistant, corrosion-resistant, the structure is firm. This pH electrode is easy to install because the threads are installed at the beginning and end.
The electrode is equipped with a protective sleeve with its own cleaning port so that the user can quickly access the automatic cleaning system.
The indicator electrode is made of blue low-impedance hemispherical glass. It has high strength and is not easily broken. The tinted glass is also easier to find due to the improper use of the electrode causing the glass head to break, which is extremely important in some special use cases.
The reference uses point ceramic hole, the reference electrode is Ag/AgCl, filled saturated KCL+ excess KCL crystals. The service life of the pH sensor is longer. The pH probe is equipped with standard 10m low noise leads, it has strong anti-interference ability.
Municipal wastewater, chemical wastewater, dosing control, aquaculture, industrial water, waste treatment, chemical, petroleum, etc.
|Product name||pH probe sensor|
Equipped with Ti ground electrodes
A British 1 NPT of the head and the tail for each install thread
Insert depth 100(including cleaning plug 115)
Diameter 35mm/Total length 260 mm(include the cleaning cover)
The colored glass head can reduce the damage to the reference electrode caused by the ultraviolet lamp irradiation and disinfection process.
It is important to measure an accurate pH value, it can help produce the desired product, produce at the lowest possible cost, prevent material damage, human injury and environmental contamination, meet regulatory requirements, and smooth research and development.
If you want to know more about the analog signals pH probe sensor, please contact us.
Contact Person: Selena Ye