|
Product Details:
|
| Product Name: | PH Probe Sensor | Product Model: | ASP500N-D10-A |
|---|---|---|---|
| Temperature Unit: | NTC10K | PH Range: | 0~14pH |
| Pressure Range: | 0 ~ 4bar | Working Temperature: | 0~60℃ |
| Material: | ABS+glass+ceramics+SUS316 | Size: | Diameter 35mm / Total Length 260 Mm |
| High Light: | NTC10K PH ORP Sensors,260 mm ph probe electrode,ABS PH ORP Sensors |
||
NTC10K Solution Ground PH Electrode PH Probe Sensor With ABS Plastic Housing
Introduction And Advantages:
The pH composite electrode with solution grounding, specifically designed for accurate detection in clean water environments.Metal stainless steel solution grounding electrode with high resistance to the corrosive environment.
The pH sensor ASP500N-D10-A is encapsulated with an enhanced ABS plastic shell, the structure is firm. This pH electrode is easy to install because the threads are installed at the beginning and end. It is also very strong in construction.
A high precision NTC10K temperature resistor for temperature detection and compensation, full contact with the measured solution, to meet the requirements of high-speed temperature response, temperature compensation is also more timely.
The electrode is equipped with a protective sleeve with its own cleaning port so that the user can quickly access the automatic cleaning system.
The indicator electrode is made of blue low-impedance hemispherical glass. It has high strength and is not easily broken.
The reference uses annular ceramic hole, the reference electrode is Ag/AgCl, filled KCL colorless high-temperature gel. The pH sensor is equipped with standard 10m low noise leads, it has strong anti-interference ability.
Applications Of The pH Electrode:
Municipal wastewater, chemical wastewater, dosing control, aquaculture, industrial water, waste treatment, chemical, petroleum, etc.
Technical parameters:
| Product Name | pH probe sensor |
| Product Model |
ASP500N-D10-A |
| pH Range | 0~14pH |
| Pressure Range | 0~4bar |
| Temperature Range | 0~60℃ |
|
Materials |
ABS+Glass+ceramics +SUS316 |
| Temperature Unit | NTC10K |
|
Mounting Size |
Equipped with 316 ground electrodes; A British 1 NPT of the head and the tail for each install thread; Insert depth 100(including cleaning plug 115) |
|
Size |
Diameter 35mm/Total length 260 mm(include the cleaning cover) |
Suggestions:
The colored glass head can reduce the damage to the reference electrode caused by the ultraviolet lamp irradiation and disinfection process.
It is important to measure an accurate pH value, it can help produce the desired product, produce at the lowest possible cost, prevent material damage, human injury and environmental contamination, meet regulatory requirements, and smooth research and development.
If you want to know more about the analog signals pH probe sensor, please contact us.
Contact Person: Ms. Yuki Fu
Tel: +8615716217387
