|
Product Details:
|
| Product Name: | PH Probe Sensor | Product Model: | ASP400N-D10-A |
|---|---|---|---|
| Temperature Unit: | NTC10K | PH Range: | 0~14pH |
| Pressure Range: | 0 ~ 6bar | Working Temperature: | 0~100℃ |
| Material: | PPS+Glass+ | Size: | Diameter 35mm/Total Length 260 Mm |
| High Light: | 14pH pH ORP Sensor,NTC10K pH Composite Probe,6bar pH Electrode |
||
NTC10K PH Sensor PH Composite Probe Electrode With Temperature Compensation
Introduction and advantages:
The pH sensors are one of the most basic tools typically used for water measurements. The proper use of pH sensors can ensure the safety and quality of products and monitor processes occurring within a wastewater or manufacturing plant.
This composite electrode ASP400N-D10-A is packaged in a high-performance PPS plastic case. This material housing is resistant to high temperature and corrosion. This pH electrode is easy to install because the threads are installed at the beginning and end. It is also very strong in construction.
The pH sensor has a built-in high precision NTC10K temperature resistor for temperature detection and compensation.The electrode is equipped with a protective sleeve with its own cleaning port, so that the user can quickly access the automatic cleaning system. The indicator electrode is made of low-impedance hemispherical glass. It has high strength and is not easily broken.
Double salt bridge is designed for the reference system, the reference electrode is Ag/AgCl, reference packed saturated KCL+ excess KCL crystals. The reference of the pH probe uses large-area annular porous diaphragm. It has the characteristics of fast penetration, fast response, not easy to block, and easy cleaning.
The pH sensor is equipped with standard 10m low noise leads.
Applications:
Municipal wastewater, chemical wastewater, dosing control, aquaculture, industrial water, waste treatment, chemical, petroleum,etc.
Technical parameters:
| Product name | pH probe sensor |
| Product model |
ASP400N-D10-A |
| pH range | 0~14pH |
| Pressure range | 0~6bar |
| Temperature range | 0~100℃ |
|
Materials |
PPS+Glass+ |
| Temperature unit | NTC10K |
|
Mounting Size |
A British 1 NPT of the head and the tail for each install thread; Insert depth 100(including cleaning plug 115) |
|
Size |
Diameter 35mm/Total length 260 mm(include the cleaning cover) |
Suggestions:
pH electrode is a consumable product in electrochemistry, not the same as instrumentation, only when the user has good knowledge of necessary maintenance can the service life of the pH sensor be better extended.
It is important to measure an accurate pH value, it can help produce the desired product, produce at the lowest possible cost, prevent material damage, human injury and environmental contamination, meet regulatory requirements, and smooth research and development.
If you want to know more about the analog signals pH probe sensor, please contact us.
Contact Person: Ms. Yuki Fu
Tel: +8615716217387
