|
Product Details:
|
| Product Name: | PH Probe Sensor | Product Model: | ASP100V-D03-A |
|---|---|---|---|
| PH Range: | 0~14pH | Pressure Range: | 0 ~ 4bar |
| Working Temperature: | 0~100℃ | Size: | Diameter 12mm/Length120mm |
| High Light: | 12pH PH ORP Sensors,12pH handheld ph probe,12mm PH ORP Sensors |
||
Analog Signals PH Probe Sensor PH Electrode 12pH Double Salt Bridge
Introduction and advantages:
The pH sensor helps to measure the acidity or alkalinity of the water with a value between 0-14. A substance is considered neutral when it has a pH of 7. Substances with a pH higher than 7 represent higher alkalinity, while substances with a pH lower than 7 are considered to be more acidic.
The pH probe ASP100V-D03-A sensor is a pH composite electrode.
Blue low-impedance hemispherical glass head has the advantage of high strength and not easy to break, can enhance the measurement accuracy.
The reference electrode of the pH probe sensor is Ag/AgCl, filled KCL colorless high temperature gel. It has the advantage of low maintenance and suitable for online measurements in demanding applications.
The reference system is a double salt bridge design, and the annular ceramic pore has the characteristics of fast response, not easy to clog, and easy to clean.
The pH probe is equipped with standard 3m low noise leads.
Applications:
1. Water treatment monitoring: drinking water, surface water source water quality, groundwater, environmental protection sewage discharge monitoring, urban drainage pipe network monitoring, etc.
2. Industrial process monitoring and dosing control management: chemical industry, petroleum, papermaking, food and medicine, electroplating, PCB manufacturing, etc.
Technical Parameters:
| Product Name | pH probe sensor |
| Product Model |
ASP100V-D03-A |
| pH Range | 0~14pH |
| Pressure Range | 0~4bar |
| Temperature Range | 0~100℃ |
| Zero Point(E0)pH |
pH6.86 buffer solution:6.86±0.3 pH |
|
Slope(SLOP)% |
pH4.01 pH6.86 buffer solution:>95% |
|
Materials |
Glass+ceramics sand core |
|
Size |
Diameter 12mm/Length120mm |
| Signal Cable Connector | pin type(accept customer's customization) |
Suggestions:
pH electrode is a consumable product in electrochemistry, not the same as instrumentation, only when the user has good knowledge of necessary maintenance can the service life of the pH probe be better extended.
Accurate pH measurement is important, producing the desired product, producing at the lowest possible cost, preventing material damage, human injury, and environmental contamination, meeting regulatory requirements, and smooth research and development. So you need to choose a high quality pH probe. It is very wise to choose our pH probe sensor ASP100V-D03-A.
If you want to know more about our products, please contact us.
Contact Person: Ms. Yuki Fu
Tel: +8615716217387
