|
Product Details:
|
| Product Name: | Hydrogen Peroxide Sensor Water Quality Sonde | Product Model: | Hydrogen Peroxide Sensor WP10 |
|---|---|---|---|
| Measurand(s): | Hydrogen Peroxide | PH Range: | 2 ~ 11 |
| Pressure Range: | 0 ~ 1bar | Response Time: | T90 8min. |
| Flow Rate: | 30L / H,low Flow-dependence | Temperature Range: | 5 ~ 45 ℃ |
| High Light: | 1bar Water Quality Sonde,1bar Hydrogen Peroxide Sensor,OEM Water Quality Sonde |
||
45℃ Hydrogen Peroxide Sensor Water Quality Sonde For High Concentrations
Introduction
The water quality sonde hydrogen peroxide sensor WP10 is used for the measurement of hydrogen peroxide, especially for high concentrations. You can calibrate the sensor via analytical determination by DPD-method at the controller. The pH range of the hydrogen peroxide probe is 2 ~ 11pH. The flow rate of the water quality sonde is about 30L/h, low flow-dependence. The material of the hydrogen peroxide sensor is PVC-U, stainless steel 1.4571. The response time is T90 about 8min.
About the interference: Cl2 must not be existent, PES must not be existent, O3 must not be existent, sulfide must not be existent, phenols aqueous solution >3 % must not be existent.
Specifications
| Product Name | Hydrogen peroxide sensor water quality sonde |
| Product Model | Hydrogen peroxide sensor WP10 |
| pH Range | 2 ~ 11 |
| Pressure Range | 0 ~ 1bar, no pressure surges or fluctuations |
| Temperature Range |
5 ~ 45℃ |
|
Response Time
|
T90 8min.
|
|
Connection |
For mA-version 2-pole terminal, M12 male or Modbus RTU with M12 male |
|
Shaft Length |
Standard 175 mm, and up to 220 mm in length (mA-Version) |
|
Material |
PVC-U, stainless steel 1.4571 |
|
Flow Rate |
30 L/h |
| Absence Of Disinfectant |
Max. 24 h
|
Scope Of Supply
Water quality sonde hydrogen peroxide sensor WP10: sensor, membrane cap, electrolyte.
Applications Of The Hydrogen Peroxide Sensor
All types of water treatment, surfactants are tolerated to the greatest possible extent.
Ordering Data:
|
Type |
Measuring range(ppm) |
Resolution(ppm) |
Output signal |
Power supply |
Item number |
|
WP10H-M0c |
0.0 ~ 200.0 |
0.1 |
Modbus RTU |
9 ~ 30 V DC |
3326350 |
|
WP10N-M0c |
0 ~ 2000 |
1 |
3326353 |
||
|
WP10L-M0c
|
0 ~ 2 % (20000)
|
0.001 % (10) |
3326351 |
||
|
WP10-20%-M0c
|
0 ~ 20 % (200000)
|
0.01 % (100) |
3326352 |
||
|
WP10MA-200
|
0.0 ~ 200.0 |
0.1 | 4 ~ 20mA |
12 ~ 30 VDC RL 50 ~ 900Ω |
3326313
|
|
WP10MA-2000
|
0 ~ 2000 |
1 |
3326314
|
||
|
WP10MA-2%
|
0 ~ 2 % (20000) |
0.001 % (10) |
3326310
|
||
|
WP10MA-5%
|
0 ~ 5% (50000)
|
0.01 % (100) |
3326311
|
||
|
WP10MA-10%
|
0 ~ 10% (100000)
|
0.01 % (100) |
3326312
|
||
|
WP10MA-200-M12
|
0.0 ~ 200.0 |
0.1 | 4 ~ 20mA |
12 ~ 30 VDC RL 50 ~ 900Ω |
3326323
|
|
WP10MA-2000-M12
|
0 ~ 2000 |
1 |
3326324
|
||
|
WP10MA-2%-M12
|
0 ~ 2 % (20000) |
0.001 % (10)
|
3326320
|
||
|
WP10MA-5%-M12
|
0 ~ 5% (50000) |
0.01 % (100)
|
3326321
|
||
|
WP10MA-10%-M12
|
0 ~ 10% (100000) |
0.01 % (100)
|
3326322
|
If you are interested in the water quality sonde hydrogen peroxide sensor WP10, please contact us.
Contact Person: Ms. Yuki Fu
Tel: +8615716217387
