Product Details:
|
Product Name: | Chlorine Sensor | Product Model: | Chlorine Sensor CN1.1 |
---|---|---|---|
PH Range: | 6.5 ~ 9 | Pressure Range: | 0 ~ 0.5bar |
Temperature Range: | 0 ~ 40℃(not Any Ice Crystals In Water) | Response Time: | T90 2min. |
Flow Rate: | 30L / H, Low Flow Dependence | Material: | PVC-U, PEEK, Stainless Steel 1.4571 |
Highlight: | 0.5bar Water Quality Sonde,0.5bar Chlorine Electrode,CE Water Quality Sonde |
Chlorine Electrode Temperature Compensation Check For The Absence Of Chlorine
Descriptions
Systematic disinfection is an essential step in water treatment and legally required in many areas to protect people and systems from illness or damage. However, high doses of disinfectants such as chlorine and chlorine dioxide can be toxic, which means compliance with limit values for those disinfectants is also very important.
The water quality sonde checks for the absence of chlorine in drinking water in order to protect equipment; The operating period in water without chlorine is maximum four weeks.
The measurands of the chlorine sensor water quality sonde is NaClO (sodium hypochlorite), Cl2 (chlorine gas), electrolytically generated chlorine. The connection of the chlorine sensor is Modbus RTU with M12 male. The material of the sensor is PVC-U, PEEK, stainless steel 1.4571, microporous membrane.
Specifications
Product Name | Chlorine electrode |
Product Model | Chlorine sensor CN1.1 |
pH Range | 6.5~9 |
Pressure Range | 0~0.5bar, no pressure surges or fluctuations |
Temperature Range |
0~40℃ (no ice crystals in measurement water) |
Calibration |
Via analytical chlorine determination by DPD-1 method |
Response Time
|
T90 2 min.
|
Connection |
Modbus RTU with M12 male |
Shaft Length |
205 mm (Modbus version) |
Material |
PVC-U, PEEK, stainless steel 1.4571, microporous membrane |
Flow Rate |
30 L/h, low flow dependence |
Applications Of The Chlorine Electrode
Check for the absence of chlorine in water.
In addition, we should pay attention to the interferences ClO2, O3, bound chlorine may increase the value measured, reducing agent may cause slope loss. The examination of the water quality sonde chlorine sensor CN1.1 is by means of analytic determination of chlorine by DPD 1 method.
Scope Of Supply
Water quality sonde chlorine sensor CN1.1: sensor, membrane cap, electrolyte.
Ordering Data:
Type |
Measuring range(ppm) |
Resolution(ppm) |
Output signal |
Power supply |
Item number |
CN1.1H - M0c |
0.005 ~ 2.000 |
0.001 |
Modbus RTU |
9 ~ 30 V DC |
3326610 |
If you are interested in the water quality sonde chlorine electrode CN1.1, please contact us.
Contact Person: Ms. Yuki Fu
Tel: +8615716217387