|
Product Details:
|
| Product Name: | Chlorine Sensor | Product Model: | Chlorine Sensor CC1 |
|---|---|---|---|
| PH Range: | 4 ~ 12 | Pressure Range: | 0 ~ 0.5bar |
| Temperature Range: | 0 ~ 45 ℃ | Response Time: | T90 2min. |
| Flow Rate: | 30L / H | Material: | PVC-U, PEEK, Stainless Steel 1.4571 |
| High Light: | 12pH Water Quality Sonde,12pH water chlorine sensor,4pH Water Quality Sonde |
||
4 ~ 12pH Chlorine Sensor Water Quality Sonde For Fresh Water And Seawater
Descriptions
The chlorine sensor uses membrane-covered, amperometric 3-electrode system. The water quality sonde is used for the measurement of free chlorine on the basis of iso-cyanuric acid, also in seawater.
The measurands of the chlorine sensor water quality sonde is NaClO (sodium hypochlorite), Ca(ClO)2 (calcium hypochlorite), Cl2 (chlorine gas), electrolytically generated chlorine, and organic combined chlorine based on iso-cyanuric acid (tested up to an iso- cyanuric acid concentration of 500 mg/l). The connection of the chlorine sensor is 2-pole terminal, M12 male for mA-version or Modbus RTU with M12 male.
Specifications
| Product Name | Chlorine Sensor Water Quality Sonde |
| Product Model | Chlorine Sensor CC1 |
| pH Range | 4~12 |
| Pressure Range | 0~0.5bar, no pressure surges or fluctuations |
| Temperature Range |
0~45℃ (no ice crystals in measurement water) |
| Calibration |
via analytical chlorine determination by DPD-1 method |
|
Response Time
|
T90 2 min.
|
|
Connection |
mA - version 2 - pole terminal, M12 male or Modbus RTU with M12 male |
|
Shaft Length |
standard 175 mm, and up to 220 mm in length (mA - Version) |
|
Material |
PVC-U, PEEK, stainless steel 1.4571, microporous hydrophilic membrane |
|
Flow Rate |
30 L/h, low flow dependence |
In addition, we should pay attention to the interferences ClO2 is 100 % detected, O3 is detected.
Applications Of The Chlorine Sensor
Fresh water and seawater; surfactants are tolerated in part; a special electrolyte is used for seawater.
Scope Of Supply
Water quality sonde chlorine sensor CC1: sensor, membrane cap, electrolyte for use in freshwater use.
Ordering Data:
|
Type |
Measuring range(ppm) |
Resolution(ppm) |
Output signal |
Power supply |
Item number |
|
CC1H-M0c |
0.005~2.000 |
0.001 |
Modbus RTU |
9~30 V DC |
3426610 |
|
CC1N-M0c |
0.05~20.00 |
0.01 |
3426611 |
||
|
CC1MA2 |
0.01~2.00 |
0.01 |
4~20 mA |
12~30 VDC |
3326094 |
|
CC1MA5 |
0.01~5.00 |
0.01 |
3326096 |
||
|
CC1MA10 |
0.01~10.00 |
0.01 |
3326095 |
||
|
CC1MA20 |
0.01~20.00 |
0.01 |
3326107 |
||
|
CC1MA2-M12 |
0.01~2.00 |
0.01 | 4~20 mA |
12~30 VDC |
3426615 |
|
CC1MA5-M12 |
0.01~5.00 |
0.01 |
3426616 |
||
|
CC1MA10-M12 |
0.01~10.00 |
0.01 |
3426617 |
||
|
CC1MA20-M12 |
0.01~20.00 |
0.01 |
3426618 |
If you are interested in the water quality sonde chlorine sensor CC1, please contact us.
Contact Person: Ms. Yuki Fu
Tel: +8615716217387
