|
Product Details:
|
| Product Name: | Chlorine Sensor | Product Model: | Chlorine Sensor CL4.2 |
|---|---|---|---|
| PH Range: | 6 ~ 8 | Pressure Range: | 0 ~ 1bar |
| Temperature Range: | 0 ~ 45 ℃ | Response Time: | T90 30s |
| Flow Rate: | 30L / H | Material: | PVC-U |
| High Light: | 6pH Water Quality Probe,T90 30s Chlorine Sensor,8pH Water Quality Probe |
||
6 ~ 8pH Chlorine Sensor Water Quality Probe For The Measurement Of Chlorine
Descriptions
Free chlorine is the most important disinfectant in water treatment due to its easy handling, the strong disinfecting effect, and the depot effect. The chlorine sensor with membrane-covered, amperometric 2-electrode system water quality probe is designed for the measurement of free inorganic chlorine at constant pH.
The measurands of the chlorine sensor water quality probe is NaClO (sodium hypochlorite), Ca(ClO)2(calcium hypochlorite), Cl2 (chlorine gas), chlorine generated by membrane-electrolysis. It has integrated automatic temperature compensation. The size of the chlorine sensor is standard 175 mm, and up to 220 mm in length (mA-Version).
Specifications
| Product Name | Chlorine Sensor Water Quality Probe |
| Product Model | Chlorine Sensor CL4.2 |
| pH Range | 6~8 |
| Pressure Range | 0~1bar, no pressure surges or fluctuations |
| Temperature Range |
0~45℃ (no ice crystals in measurement water) |
| Calibration |
via analytical chlorine determination by DPD-1 method |
|
Run-in Time
|
First start - up approx. 1 h
|
|
Response Time
|
T90 about 30 sec.
|
|
Absence Of The Disinfectant
|
Max. 24 h
|
|
Connection |
mA-version 2-pole terminal, M12 male or Modbus RTU with M12 male |
|
Shaft Length |
standard 175 mm, and up to 220 mm in length (mA-Version) |
|
Material |
PVC-U and semipermeable membrane |
Applications Of The Chlorine Sensor
Swimming pool water, drinking water, service water, process water. The water must not contain any surfactants (tensides)! pH-value must be constant.
In addition, we should pay attention to the Interferences: ClO2 is being registered with factor 9 of its measured value; O3 is registered; with membrane-less chlorine electrolysis interferences may occur.
Scope Of Supply
Water quality probe chlorine sensor CL4.2: sensor, membrane cap, electrolyte
Ordering Data:
|
Type |
Measuring range(ppm) |
Resolution(ppm) |
Output signal |
Power supply |
Item number |
|
CL4.2H-M0c |
0.005~2.000 |
0.001 |
Modbus RTU |
9~30 V DC |
3326225 |
|
CL4.2N-M0c |
0.05~20.00 |
0.01 |
3326226 |
||
|
CL4.2L-M0c |
0.5~200.0 |
0.1 |
3326227 |
||
|
CL4.2MA0.5 |
0.01~0.50 |
0.01 |
4~20 mA |
12~30 VDC |
3326240 |
|
CL4.2MA2 |
0.01~2.00 |
0.01 |
3326241 |
||
|
CL4.2MA5 |
0.01~5.00 |
0.01 |
3326242 |
||
|
CL4.2MA10 |
0.01~10.00 |
0.01 |
3326243 |
||
|
CL4.2MA20 |
0.01~20.00 |
0.01 |
3326244 |
||
|
CL4.2MA-100 |
0.1~100 |
0.1 |
3326245 |
||
|
CL4.2MA-200 |
0.1~ 200 |
0.1 |
3326246 |
||
|
CL4.2MA0.5-M12 |
0.01~0.50 |
0.01 | 4~20 mA |
12~30 VDC |
3326250 |
|
CL4.2MA2-M12 |
0.01~2.00 |
0.01 |
3326251 |
||
|
CL4.2MA5-M12 |
0.01~5.00 |
0.01 |
3326252 |
||
|
CL4.2MA10-M12 |
0.01~10.00 |
0.01 |
3326253 |
||
|
CL4.2MA20-M12 |
0.01~20.00 |
0.01 |
3326254 |
||
|
CL4.2MA100-M12 |
0.1~100 |
0.1 |
3326255 |
||
|
CL4.2MA200-M12 |
0.1~200 |
0.1 |
3326256 |
If you are interested in the water quality probe chlorine sensor CL4.2, please contact us.
Contact Person: Ms. Yuki Fu
Tel: +8615716217387
