|
Product Details:
|
| Product Name: | PH Sensor | Product Model: | ASP200N-D05-A |
|---|---|---|---|
| Temperature Unit: | NTC10K | PH Range: | 0~14pH |
| Pressure Range: | 0 ~ 2bar | Working Temperature: | 0~80℃ |
| Size: | Diameter 12mm/Length120mm | Material: | Glass+Teflon |
| High Light: | NTC10K pH Electrode,PT1000 pH Sensor,14pH 2bar 80℃ PH Probe |
||
NTC10K PH Electrode Probe PH Sensor With Multihole Teflon Diaphragm
Introduction and advantages:
The pH sensor is a pH composite electrode with glass shell . The glass head of the pH sensor is low-impedance hemispherical. It has high strength and does not break easily.
A high-precision NTC10K temperature resistance is installed inside the electrode for temperature detection and compensation.
The reference electrode of the pH sensor is Ag/AgCl, filled KCL colorless high-temperature gel. The gel electrode needs low maintenance and is suitable for online measurements in demanding applications and can last long after several cleanings and disinfection.
The pH probe has a porous Teflon diaphragm. This material penetrates quickly, responds quickly, is not easily clogged, and is easy to clean.
A mounting thread of size PG13.5 is provided at the end of the electrode for easier installation.
The pH sensor is equipped with standard 5m low noise leads.
Applications:
Municipal wastewater, chemical wastewater, dosing control, aquaculture, environmental treatment plant, etc.
Technical Parameters:
| Product Name | pH sensor |
| Product Model |
ASP200N-D05-A |
| pH Range | 0~14pH |
| Pressure Range | 0~2bar |
| Temperature Range | 0~80℃ |
| Zero point(E0)pH |
pH6.86 buffer solution:6.86±0.5 pH |
|
Slope(SLOP)% |
pH4.01 pH6.86 buffer solution:>95% |
|
Materials |
Glass+Teflon |
|
Temperature Unit |
NTC10K |
|
Mounting Size |
Mounting thread PG13.5 |
|
Size |
Diameter 12mm/Length120mm |
| Signal cable connector | Pin type (accept customer's customization) |
Suggestions:
pH electrode is a consumable product in electrochemistry, not the same as instrumentation, only when the user has good knowledge of necessary maintenance can the service life of the pH sensor be better extended.
If you want to know more about the analog signals pH sensor, please contact us.
Contact Person: Selena Ye
Tel: +8618013144571
